NovaJet PRO 600e Service Manual
Cleaning Procedures
External Cleaning
The exterior surfaces of the printer may be cleaned with a soft cloth
which has been dampened. For more persistent stains, a small
amount of liquid detergent may be used. Cleaning intervals are
determined by the environment in which the printer is used.
Slide Shaft Cleaning
3-2
Maintenance
Always turn the printer OFF, remove the power cord and
the interface cable before cleaning the printer. An electri-
cal shock hazard may be present if these procedures are
not followed.
Do not use abrasive cleansers of any sort on the surfaces
of the printer. Damage to the surface may result.
Use only isopropyl alcohol on the slide shaft of the printer.
Damage to the stainless steel slide shaft may result if
cleaned with water and not completely dried off.