ENCAD NovaJet Pro 600e Service Manual page 120

NovaJet PRO 600e Service Manual
Figure 5-10. Electronics Cover Removal.
4. With a flathead screwdriver, press the Electronics Cover (p/o the
Ink Delivery System) tab located in the upper slot on the left side of
the Carriage Assembly. See Figure 5-10. Lift up on the front left
side of the Electronics Cover until it comes part way off of the
Carriage Assembly. Then lift up on the front right side of the
Electronics Cover and move the Electronics Cover slightly to the left
so that the back of it clears the Back Support Bracket.
Assembly\Disassembly 5-21