16
en | Optional Modules and Peripheral Devices
Example : Data Bus Location 103 - DIP Settings
Figure 5.5: DX2010 DIP Switch Settings
5.2.5
Status Indicator
–
–
–
–
–
–
Figure 5.6: DX2010 Status Indicators
5.2.6
Test
The alarm control panel tests the communication normally with the module. In case of
communication failure, a fault report with the module address is sent.
2013.07 | 03 | F.01U.267.112
Flashing once per second: Indicating normal operation.
Constant illumination indicates following conditions:
The grounding conductor is not connected or there is communication failure between the
alarm control panel and the module.
No zones are distributed to modules with corresponding addresses.
Module address setting error.
Off: The module is de-Energized.
Status Indicator
On
Installation Guide
AMAX panel 4000 / AMAX panel 4000
Off
DIP Switch
Bosch Sicherheitsysteme GmbH
EN