Change Individual Code - Bosch AMAX panel 4000 Installation Manual

AMAX panel 4000 / AMAX panel 4000
EN
b) Enter the user number (1-64) and press [#].
c) Enter the user code priority (0-15) and press [#].
00 = Master User
01 = Super User
02 = Basic User
03 = Arming User
04 = Duress User
05-15 = No Permission
d) Enter the value (00-71) for the area assignment for this user and press [#].
Please contact your installer for the right Values or check Table in Quick Reference Guide.
e) Enter the new user code (Default code length=4 digits / 5 or 6 digit code must be enabled
through the installer) and press [#].
It beeps twice and the Keypad shows the next user.
f) Press long [-] to exit.
Notice!
This function is automatically terminated if you do not press a button within 240 seconds or if
you press [#]. One long beep indicates that the code already exists or that you entered an
incorrect user number.
10.8.2

Change Individual Code

This function allows user to change the individual code.
How to change the code
a) Enter your code + [5] [5] [#] and press.
It beeps twice and the STAY and AWAY indicators start flashing.
b) Enter the new code (Default code length=4 digits / 5or 6 digit code must be enabled
through the installer) and press [#].
It beeps twice and the STAY and AWAY indicators stop flashing.
10.9 Keypad Alarm Operation Commands
10.9.1 Keypad Panic Alarm
If you simultaneously press and hold [1] and [3] or simultaneously press and hold [*] and [#]
for 3 seconds a silent panic alarm will be transmitted.
Please contact your installer to enable/disable the keypad emergency alarm functionality.
Bosch Sicherheitsysteme GmbH Installation Guide
Keypad Usage and Operations | en
2013.07 | 03 | F.01U.267.112
165