Status Icons / Led's; Keypad Tones - Bosch CC610PB User Manual

Solution 6000 User Guide
Figure 1: Keypad Emergency Alarm Triggers

Status Icons / LED's

The following table describes the function of each of
the status icons and indicator lights. Some keypads and
readers also include a blue indicator which is used when
controlling doors or user access.
Icon Status
The keypad can display which areas (1 – 8) are
turned on or off via the Area Icon Indicators. This
option needs to be enbled by your installer,
On The area is turned All On or Part On
Off The area is turned Off
Flashing
The area has an alarm
Fast
On System power is normal
Flashing System power is missing
Flashing A fire alarm is active
Off No fire alarm
Fire alarm in memory (Turn the area
On
All On and Off to clear).
Flashing A burglary alarm is active
Off No burglary alarm
Burglary alarm in memory (Turn the
On
area All On and Off to clear).
The existing service or trouble
On
condition has been acknowledged
Off No service or trouble conditions exist
A service or trouble condition is
Flashing present that has not been acknowl-
edged
On The area is turned Part On
Off The area is not turned Part On
On The area is turned off.
Off The area is turned All On or Part On
On The area is turned All On
Off The area is turned Off
On You have mail waiting to be read
Off No Mail
8
Meaning
Icon Status
On Area is ready to turn All On /Part On
Off Not ready, Zone Open
On All On or Part On
Red
LED
Flashing Alarm
On Area is not All On
Green
LED
Flashing Zone is Faulted
Red &
Flashing Installer programming mode is active
Green
Off User Programming Mode is Active
LED
On Door Locked
Fast
Door Unlocked
Flash
Blue
LED
2
Door Unlocked by TimeZone
Flashes
Off Door Assignment not programmed
The WiFi enabled keypad or module
has successfully connected to your
local WiFi network.
The WiFi enabled keypad or module
is not connected to your local WiFi
network.
Table 3: Status ICONs, LED Indicator's and Their Meanings

Keypad Tones

Your keypad emits several distinct tones and displays text
to alert you to system events. Additional bells or sirens
may also be connected to your system. Bells or sirens
mounted on the exterior of your premises alert neighbours
to emergencies and provide an audible guide for police
and fire fighters.
Type
Fire When a fire zone sounds an alarm, the
Alarm keypad will sound 3 seconds on and 2
Tone seconds off (repeat).
When a burglary zone activates while your
Burglary
system is turned on, your keypad emits a
Alarm
continuous siren tone. It sounds for the
Tone
time set by your security company.
When a system component is not
Trouble functioning properly, your keypad sounds
Tone 4 fast short beeps followed by a 5 second
pause (repeat).
Key
Pressing any key on the keypad sounds one
Press short beep, indicating that the key press is
Tone
accepted.
Meaning
Meaning
Bosch Security Systems 3/23 BLCC610U