AMAX panel 4000 / AMAX panel 4000
EN
–
Figure 8.19: Modem Connect
Notice!
Modem string settings in figure x.1 are only used, when the default modem string is not used.
If the default modem string should be used, activate parameter "Using the default modem
string" in register "Link" of Customer Information (see figure x.2). In this case the values in
figure x.1 are ignored.
Instead the following string is used: AT&CI&D2X0&Q0S7=255S9=0+MS=B103B17
Bosch Sicherheitsysteme GmbH
Or manual dialing connection: Select "Modem Connection" in the "Connection" tab page
and click "Waiting for Callback", then initiate callback call from the alarm control panel
with keypad: Enter SUBSCRIBER NUMBER, press [5] [7] and then [#].
Installation Guide
Configuration | en
99
2013.07 | 03 | F.01U.267.112