Keypad Operation; Lcd Status Icons; Keypad Key Functions - Bosch CP700B Installer's Reference Manual

Keypad Operation

Keypads can be configured to provide system area
control, door access control or both depending on the
installation requirements.
Feedback is provided by both the LCD display on the
keypad and also via the green, blue and red indicators
and the keypad sounder.
Smart Card enabled keypads also include an egress
input and lock output which can be used to control door
access if required.

LCD Status Icons

The following table lists the function of each of the ICON
symbols shown on the keypad LCD display.
LCD Status Icons
Status
Icon
The keypad can be programmed to display
area icons (1 to 8) that allow users to easily
identify which areas have been turned on or
off without the need to toggle between areas
(See MENU 6-1-4).
The area is turned All On or Part
On
On
Off The area is turned Off
Flashing
The area has an alarm
Fast
On System power is normal
Flashing System power is missing
Flashing A fire alarm is active
Off No fire alarm
Fire alarm in memory (Turn the
On
area All On and Off to Clear).
The existing service or trouble
On condition has been acknowl-
edged.
No service or trouble conditions
Off
exist.
A service or trouble condition is
Flashing
present that has not been ac-
knowledged.
On
The area is turned Part On.
Off The area is not turned Part On.
On The area is turned off.
The area is turned All On or Part
Off
On
The area is turned All On or Part
On
On
Off The area is turned Off
Bosch Security Systems 03/16 Graphic Keypads BIRG FTR1.0
Meaning
Graphic Keypads
On All messages have been read.
Off Message queue is empty
An unread message is in the
Flash
queue.
Area is ready to turn on
On
(All On / Part On)
Off Not ready, Zone Open
The Wi-Fi enabled keypad or
module has successfully connect-
ed to your local Wi-Fi network.
The Wi-Fi enabled keypad or
module is not connected to your
local Wi-Fi network.
Table 3: Icon Indicator Meanings

Keypad Key Functions

Graphic keypads include of 20 individual keys which are
used to enter PIN's and control the system. Some keys
have a secondary functions that are activated by holding
the key down for two seconds.
Keypad Key Functions
Button
The numeric buttons allow you to en-
[0] to [9] ter PIN numbers and other functions
when required.
To arm the area (All On), enter the
[ON]
user PIN followed by the [ON] key.
To arm the area (Part On), enter the
[PART]
user PIN followed by the [PART] key.
To disarm the area, enter the user PIN
[OFF]
followed by the [OFF] key.
The [OK] key allows you to save any
[OK]
changes and exit the command.
Use the [MENU] and the numeric keys
to enter commands. The [MENU] key
is also used to go back one level when
[MENU]
navigating through menus or to exit
a programming location without
saving changes.
The [MAIL] key allows you to read
stored mail (TBA). This key can also be
[MAIL]
used to initiate a dialler test when you
press and hold for two seconds.
The arrow keys allows you to move
the cursor left or right and to navigate
through menus or to toggle text
[Arrow Keys]
characters
telephone numbers or names etc.
Table 4: Keypad Key Functions
Installer Reference Guide
Description
when programming
5