Bosch AMAX panel 4000 Installation Manual page 62

AMAX panel 4000 / AMAX panel 4000
62 en | Settings
EN
lf this duration is programmed as 000, the output will continue till the System is Disarmed.
19 - STAY Armed
This output operates when System is STAY Armed.
The output is reset:
1. When the output programmed duration is up.
lf this duration is programmed as 000, the output will continue till the System is Disarmed.
20 - Reset
This output operates when a reset is performed in the system.
21 - Follow Zone Event Zone Number
The output follow type imitates the zone alarm state, when alarm or tamper is generated in
the corresponding zone, the output will be enabled. When system arming, disarming or output
time ends, the output will be reset.
For actual output time, See Table The Value Ranges of Output Programming Options, page 125
22 - RF Keyfob button 3
The output is triggered when Keyfob Button 3 is pressed.
23 - RF Keyfob button 4
The output is triggered when Keyfob Button 4 is pressed.
24 - Chime Indication
The output is triggered when Chime Indication.
25 - Verified Alarm
The output is triggered when Verified Alarm.
26 - Unverified Alarm
The output is triggered when Unverified Alarm.
27 - Technical Alarm
The output is triggered when Technical Alarm.
28 - Bypassed Zone
The output is triggered when Bypassed Zone.
29 - Ready to Arm
The output is triggered when ready to arm.
30 – Walk Test Output Mode
The output is triggered when Walk Test Output Mode.
2013.07 | 03 | F.01U.267.112 Installation Guide Bosch Sicherheitsysteme GmbH