Warning/Malfunction Alerts - MV Agusta F3 User Manual

4.4.9. Warning/malfunction alerts

The dashboard may highlight the presence of a fault or
a malfunction during different using conditions of the
motorcycle.
Engine start: As you turn the ignition switch to the ON
position, the instruments and the warning lights will go
through the self-diagnostic cycle. If the self-diagnostic
4
cycle detects a fault in the vehicle, the display shows
the warning alert shown in the picture. In particular, this
message highlights the vehicle part or device on which
the fault has been detected.
Press "OK" button to access to "RUN" mode. The
direction indicator emergency lights begin to flash.
WARNING
If a fault is detected on the vehicle when the
engine is off, do not start engine and contact
an authorized MV Agusta centre.
OPERATION
- 68 -
4