Multifunction Display - MV Agusta F3 Owner's Manual

3.7.2. Multifunction display

Traction control level display
Indicates the traction control level curren-
tly selected.
Control unit mapping display.
Indicates the number of the control
unit mapping currently selected.
3
Gear display
It displays the currently engaged
gear. "N" stands for "neutral".
Clock
Indicates the current time.
"TOTAL" odometer:
It displays the total distance covered; from 0 to 999999 (Km or miles)
Trip counter 1, "TRIP 1"
It displays the length of a trip; from 0 to 999.9 (Km or miles)
Trip counter 2, "TRIP 2"
It displays the length of a trip; from 0 to 999.9 (Km or miles)
Chronometer
It displays the time measured by the chronometer
CONTROLS AND INSTRUMENTS
It displays the speed of the motorbike. It can be given
in kilometres per hour (Km/h) or in miles per hour
(Mph). The full scale measures 300Km/h (186 Mph).
Danger - Notice: if the temperature is high, stop
the motorbike and check the coolant level. If it
needs to be filled up, contact a MV Agusta licensed
service centre (see § 3.8). If the warning light turns
on even if the level is adequate, stop driving and
contact a MV Agusta licensed service centre.
- 60 -
Speedometer
Thermometer
It displays the temperature of the
coolant by turning on a variable
number of segments on a gradua-
ted scale. When the temperature
falls outside the normal operating
range, it may display one of the
following information:
- the display shows just one
blinking segment; it means that
the temperature is low;
- all segments are on, while the
upper segment is blinking; it
means that the temperature is
high.
3