Engine Removal Preliminary Operations - MV Agusta Brutale 990 R Workshop Manual

At this point it is possible to remove the complete sub-
frame assembly from the motorcycle.
Rear frame unit assembly
Carry out the operation of reassembling the rear sub-
frame on the motorcycle in the reverse order of
removal, taking care to tighten the fixing screws to the
prescribed torque pressure.
Rear sub-frame fixing screw torque pressure:
24÷28 N•m

ENGINE REMOVAL PRELIMINARY OPERATIONS

Side stand removal
Disconnect the connector of the side stand switch from
the main wiring.
Frame
- 23 -
G
24÷28 N•m