Mazda RX-8 Workshop Manual page 92

While performing this step,
always operate the vehicle in a
safe and lawful manner.
When the M-MDS is used to
observe monitor system status
while driving, be sure to have
another technician with you, or
record the data in the M-MDS
using the PID/DATA MONITOR
AND RECORD capturing function
and inspect later.
Drive the vehicle under the
snapshot data condition.
Perform the KOER self test.
(See
[13B-MSP].)
Is the same DTC present?
VERIFY AFTER REPAIR PROCEDURE
12
Perform the "AFTER REPAIR
PROCEDURE".
(See
[13B-MSP].)
Are any DTCs present?
< Previous Next >
KOEO/KOER SELF TEST
AFTER REPAIR PROCEDURE
© 2012 Mazda North American Operations, U.S.A.
YesGo to the applicable DTC inspection.
(See DTC TABLE
No DTC troubleshooting completed.
[13B-MSP].)
Back to Top