Mazda RX-8 Workshop Manual page 161

< Previous Next >
2011 - RX-8 - Engine
AFTER REPAIR PROCEDURE [13B-MSP]
1. Connect the M-MDS to the DLC–2.
2. After the vehicle is identified, select the following items from the initialization screen of the M-
MDS.
When using the IDS (laptop PC)
When using the PDS (Pocket PC)
3. Verify the DTC according to the directions on the M-MDS screen.
4. Press the clear button on the DTC screen to clear the DTC.
5. Verify that no DTCs are displayed.
Select "Self Test".
Select "Modules".
Select "PCM".
Select "Retrieve CMDTCs".
Select "Module Tests".
Select "PCM".
Select "Self Test".
Select "Retrieve CMDTCs".