< Previous Next >
2011 - RX-8 - Engine
DTC P0332 [13B-MSP]
DTC P0332 KS No.2 circuit low input
DETECTION
CONDITION
POSSIBLE
CAUSE
The PCM monitors the input voltage from the KS No.2 when the engine is running.
If the input voltage is less than 1.2 V, the PCM determines that the KS No.2
circuit input voltage is low.
Diagnostic support note
This is a continuous monitor (CCM).
The MIL illuminates if the PCM detects the above malfunction condition in the first
drive cycle.
FREEZE FRAME DATA (Mode 2/Mode 12) is available.
The DTC is stored in the PCM memory.
KS No.2 connector or terminals malfunction
Short to ground in wiring harness between KS No.2 terminal A and PCM terminal
2AC
Short to ground in wiring harness between KS No.2 terminal B and PCM terminal 2Y
KS No.2 malfunction
PCM connector or terminals malfunction
Open circuit in wiring harness between KS No.2 terminal A and PCM terminal 2AC
Open circuit in wiring harness between KS No.2 terminal B and PCM terminal 2Y
PCM malfunction