Mazda RX-8 Workshop Manual page 367

< Previous Next >
2011 - RX-8 - Engine
DTC P0602 [13B-MSP]
DTC P0602
DETECTION
CONDITION
POSSIBLE CAUSE
Diagnostic procedure
STEP
VERIFY FREEZE FRAME DATA (MODE 12)
1
HAS BEEN RECORDED
Has the FREEZE FRAME DATA
(Mode 12) been recorded?
VERIFY RELATED REPAIR INFORMATION
2 AVAILABILITY
Verify related Service Bulletins
and/or on-line repair information
availability.
Is any related repair information
available?
PCM programming error
No configuration data in the PCM.
Diagnostic support note
This is a continuous monitor (CCM).
The MIL illuminates if the PCM detects the above malfunction
condition in the first drive cycle.
FREEZE FRAME DATA (Mode 2/Mode 12) is available.
The DTC is stored in the PCM memory.
Configuration has not been completed
PCM malfunction
INSPECTION
YesGo to the next step.
No Record the FREEZE FRAME DATA (Mode 12) on
the repair order, then go to the next step.
YesPerform repair or diagnosis according to the
available repair information.
If the vehicle is not repaired,
go to the next step.
No Go to the next step.
ACTION