Mazda RX-8 Workshop Manual page 982

0.9—1.2 N·m {9.2—12 kgf·cm, 8.0—10 in·lbf}
2. Rotate the APV gear manually with the APV pointed perpendicular to the ground and verify that the APV can be rotated
smoothly.
APV Motor Installation Note
1. Install the intake manifold. (See
2. Rotate the APV gear manually and verify that it can be rotated smoothly (approx. three-quarter rotation).
If the gear cannot be rotated smoothly, clean the internal ports of the housing and the areas around the APV.
3. Install a new gasket, APV motor and bracket.
Tightening torque
6.9—9.8 N·m {71—99 kgf·cm, 62—86 in·lbf}
< Previous Next >
INTAKE MANIFOLD REMOVAL/INSTALLATION
© 2011 Mazda North American Operations, U.S.A.
[13B-MSP].)
Back to Top