Mazda RX-8 Workshop Manual page 259

POSSIBLE
CAUSE
Diagnostic procedure
STEP
IDENTIFY TRIGGER DTC FOR FREEZE FRAME
1 DATA (MODE 2)
Is the DTC P0133 on FREEZE
FRAME DATA (Mode 2)?
VERIFY FREEZE FRAME DATA (MODE 12) AND
2 DIAGNOSTIC MONITORING TEST RESULTS
HAVE BEEN RECORDED
Have the FREEZE FRAME DATA
(Mode 12) and DIAGNOSTIC
MONITORING TEST RESULTS (A/F
sensor, HO2S related) been
recorded?
VERIFY RELATED REPAIR INFORMATION
3
AVAILABILITY
Verify related Service Bulletins
and/or on-line repair information
availability.
Is any related repair information
available?
VERIFY RELATED PENDING CODE OR STORED
4
DTC
Turn the ignition switch off, then to
the ON position (engine off).
Verify the related PENDING CODE
or stored DTCs.
Pressure regulator (built-in fuel pump unit) malfunction
AIR system malfunction
TP sensor malfunction
Eccentric shaft position sensor malfunction
Leakage engine coolant
Purge solenoid valve malfunction
PCM malfunction
INSPECTION
YesGo to the next step.
No Go to the troubleshooting procedure for DTC
on FREEZE FRAME DATA (Mode 2).
(See DTC TABLE
YesGo to the next step.
No Record the FREEZE FRAME DATA (Mode 12)
and DIAGNOSTIC MONITORING TEST
RESULTS on the repair order, then go to the
next step.
YesPerform repair or diagnosis according to the
available repair information.
If the vehicle is not repaired,
go to the next step.
No Go to the next step.
YesGo to the DTC P0443 inspection.
(See DTC P0443 [13B-MSP].)
No Go to the next step.
ACTION
[13B-MSP].)