Mazda RX-8 Workshop Manual page 944

< Previous Next >
2011 - RX-8 - Engine
SECONDARY SHUTTER VALVE (SSV) REMOVAL/INSTALLATION [13B-MSP]
WARNING:
A hot engine and intake-air system can cause severe burns. Turn off the engine and wait
until they are cool before removing the intake-air system.
Fuel line spills and leakage from the pressurized fuel system are dangerous. Fuel can ignite
and cause serious injury or death and damage. Fuel can also irritate skin and eyes. To
prevent this, always complete the "Fuel Line Safety Procedure", while referring to the
"BEFORE SERVICE PRECAUTION".
1. Turn the steering wheel to the left to secure an operation space.
2. Complete the "BEFORE SERVICE PRECAUTION". (See
MSP].)
3. Remove the engine cover. (See.
4. Remove the battery cover, battery and battery box. (See
[13B-MSP].)
5. Drain the engine coolant. (See
6. Remove the aerodynamic under cover. (See
REMOVAL/INSTALLATION.)
7. Remove the front splash shield (RH).
8. Remove the secondary air injection (AIR) pipe installation nuts.
9. Disconnect the vacuum hose.
ENGINE COVER REMOVAL/INSTALLATION
ENGINE COOLANT REPLACEMENT
AERODYNAMIC UNDER COVER
BEFORE SERVICE PRECAUTION [13B-
BATTERY REMOVAL/INSTALLATION
[13B-MSP].)
[13B-MSP])