Mazda RX-8 Workshop Manual page 348

position sensor.
(See ECCENTRIC SHAFT
POSITION SENSOR
INSPECTION
Is there any malfunction?
INSPECT ENGINE COMPRESSION
15
Inspect the engine
compression.
(See COMPRESSION
INSPECTION
Is there any malfunction?
INSPECT METERING OIL PUMP
16
Inspect the metering oil
pump.
(See METERING OIL PUMP
INSPECTION
Is there any malfunction?
INSPECT ENGINE OIL CONDITION
17
Inspect the engine oil
condition.
Is the engine oil condition
normal?
INSPECT OIL PRESSURE
18
Inspect the oil pressure.
(See OIL PRESSURE
INSPECTION
Is there any malfunction?
INSPECT OIL PASSAGE
19
Inspect the oil pipe between
metering oil pump and
metering oil nozzle.
Is there any malfunction?
[13B-MSP].)
[13B-MSP].)
[13B-MSP].)
[13B-MSP].)
(See ECCENTRIC SHAFT POSITION SENSOR
REMOVAL/INSTALLATION
No Go to the next step.
YesGo to the next step.
No Go to Step 20.
YesRepair or replace the malfunctioning part according
to the inspection results.
Overhaul or replace the engine, then go to Step
21.
No Go to the next step.
YesGo to the next step.
No Replace the engine oil.
Overhaul or replace the engine, then go to Step
21.
YesRepair or replace the malfunctioning part according
to the inspection results.
Overhaul or replace the engine, then go to Step
21.
No Go to the next step.
YesInspect for leakage or clogging in the engine oil
passage.
Repair or replace the malfunctioning part according
to the inspection results.
Overhaul or replace the engine, then go to Step
21.
[13B-MSP].)