Dtc P0522 [13B-Msp] - Mazda RX-8 Workshop Manual

< Previous Next >
2011 - RX-8 - Engine

DTC P0522 [13B-MSP]

DTC P0522
DETECTION
CONDITION
POSSIBLE CAUSE
Oil pressure sensor circuit low input
The voltage of oil pressure sensor input terminal is less than 0.2 V for
0.5 s or more.
Diagnostic support note
This is a continuous monitor (other).
The MIL does not illuminate.
FREEZE FRAME DATA (Mode 2/Mode 12) is not available.
The DTC is stored in the PCM memory.
Oil pressure sensor connector or terminals malfunction
Short to ground in wiring harness between oil pressure sensor terminal C
and PCM terminal 2AA
Short to ground in wiring harness between oil pressure sensor terminal B
and PCM terminal 2R
PCM connector or terminals malfunction
Open circuit in wiring harness between oil pressure sensor terminal C and
PCM terminal 2AA
Open circuit in wiring harness between oil pressure sensor terminal B and
PCM terminal 2R
Oil pressure sensor malfunction
PCM malfunction