Mazda RX-8 Workshop Manual page 418

POSSIBLE
CAUSE
Diagnostic procedure
STEP
IDENTIFY TRIGGER DTC FOR FREEZE FRAME
1 DATA (MODE 2)
Is the DTC P2097 on FREEZE FRAME
DATA (Mode 2)?
VERIFY FREEZE FRAME DATA (MODE 12) AND
2 DIAGNOSTIC MONITORING TEST RESULTS HAVE
BEEN RECORDED
Have the FREEZE FRAME DATA (Mode
12) and DIAGNOSTIC MONITORING
TEST RESULTS (fuel system related)
been recorded?
VERIFY RELATED REPAIR INFORMATION
3
AVAILABILITY
Verify related Service Bulletins and/or
on-line repair information availability.
Is any related repair information
available?
A/F sensor malfunction
Fuel pump speed control malfunction
Fuel line pressure malfunction
Fuel pump unit malfunction
Pressure regulator (built-in fuel pump unit) malfunction
Purge solenoid valve malfunction
Insufficient compression
Metering oil pump malfunction
Engine oil condition malfunction
Increased oil pressure
Oil passage malfunction
Engine malfunction
PCM malfunction
INSPECTION
YesGo to the next step.
No Go to the troubleshooting procedure for
DTC on FREEZE FRAME DATA (Mode 2).
(See DTC TABLE
YesGo to the next step.
No Record the FREEZE FRAME DATA (Mode
12) and DIAGNOSTIC MONITORING TEST
RESULTS on the repair order, then go to
the next step.
YesPerform repair or diagnosis according to
the available repair information.
If the vehicle is not
repaired, go to the next
step.
ACTION
[13B-MSP].)