Mazda RX-8 Workshop Manual page 422

Is there any malfunction?
INSPECT ENGINE OIL CONDITION
14
Inspect the engine oil condition.
Is the engine oil condition normal?
INSPECT OIL PRESSURE
15
Inspect the oil pressure.
(See OIL PRESSURE INSPECTION
[13B-MSP].)
Is there any malfunction?
INSPECT OIL PASSAGE
16
Inspect the oil pipe between metering
oil pump and metering oil nozzle.
Is there any malfunction?
VERIFY TROUBLESHOOTING OF DTC P2097
17
COMPLETED
Make sure to reconnect all
disconnected connectors.
Clear the DTC from the PCM memory
using the M-MDS.
(See AFTER REPAIR PROCEDURE [13B-
MSP].)
Maintain the engine speed at 2,500—
3,500 rpm for 15 s or more, then
increase it to 4,500—5,000 rpm and
maintain it for 15 s or more.
Idle the engine until the cooling fan
stops, then maintain the engine idling
for 60 s or more.
No Go to the next step.
YesGo to the next step.
No Replace the engine oil.
Overhaul or replace the engine, then go
to Step 17.
YesRepair or replace the malfunctioning part
according to the inspection results.
Overhaul or replace the engine, then go
to Step 17.
No Go to the next step.
YesInspect for leakage or clogging in the
engine oil passage.
Repair or replace the malfunctioning part
according to the inspection results.
Overhaul or replace the engine, then go
to the next step.
No Overhaul or replace the engine, then go
to the next step.
YesReplace the PCM, then go to the next
step.
(See PCM REMOVAL/INSTALLATION [13B-
MSP].)
No Go to the next step.