Mazda RX-8 Workshop Manual page 927

< Previous Next >
2011 - RX-8 - Engine
FAN MOTOR INSPECTION [13B-MSP]
Part Inspection
1. Verify that the battery is fully charged. (See
2. Disconnect the cooling fan motor connector (4 terminals).
3. Install a tester and battery to the cooling fan motor connector (4 terminals) as shown in the
figure.
4. Verify that each fan motors operate smoothly at the standard current.
If there is any malfunction, replace the applicable part.
Cooling fan motor No.1, No.2 standard current
7.7—10.7 A [12V]
< Previous Next >
BATTERY INSPECTION [13B-MSP].)