2. After the vehicle is identified, select the following items from the initialization screen of the M-
MDS.
When using the IDS (laptop PC)
When using the PDS (Pocket PC)
3. Verify the DTC according to the directions on the screen.
If any DTCs are displayed, perform troubleshooting according to the
corresponding DTC inspection.
4. After completion of repairs, clear all DTCs stored in the TPMS. (See
Clearing DTCs Procedure
1. Connect the M-MDS to the DLC-2.
1. Select "Self Test".
2. Select "Modules".
3. Select "TPM".
1. Select "Module Tests".
2. Select "TPM".
3. Select "Self Test".
Clearing DTCs
Procedure.)