View 3D Content
This section provides information and procedures for setting up and managing 3D presentations.
Hardware and software requirements
To display 3D images you require these items:
•
A Christie CP42LH projector
•
A 3D hardware system:
•
Pi-Cell polarizer for display on a screen that has a silver polarization-preserving surface
for use with passive glasses (RealD)
•
Rotating polarizing wheel (external) with passive circular polarizing glasses
(MasterImage); requires a silver screen
•
IR emitter for controlling the left eye/right eye gating (switching) of active glasses
(Xpand)
•
Dual projector 3D—passive glasses (color separation); requires a white screen
•
6P 3D requires these items:
•
Two Christie CP42LH projectors
•
One laser rack containing LM-L-MP lasers (P/N: 000-104235-XX)
•
One laser rack containing LM-R-MP lasers (P/N: 000-104236-XX)
•
A 3D connection cable
•
Power supply for your synchronization output device. The 3D sync port can power output
devices.
•
Any 3D computer software application that supports 3D stereo on a supported computer(s) with
associated graphic cards (suggested cards include AMD or NVIDIA)
•
A video stream from a video source prepared to be sequential content (for Direct-Input 3D) or
two video streams from a video source that has been prepared to be supplied left eye and right
eye concurrently and frame locked (Dual-Input 3D)
CP42LH User Guide
020-101363-03 Rev. 1 (08-2016)
63