Distinctive Ringing - Comdial G0408 Manual

Digital Telephone System
Direct Station Call Hold (Station Park)
This feature allows a station user to park a call at a specific station where it will be held
without ringing. A feature code plus a station extension number can be dialed over the
intercom line to park the call or a programmable button can be programmed to provide a
"directed hold" to a specific station. The parked call is picked up by directed station by
dialing a feature code. It can be picked up at any station through the use of the call
pickup feature. No class of service is required.
See also, Call Pick-Up—Directed and Call Park.
Direct Station Selection (DSS) Programmable
A station user can store one-button, direct station selection (DSS) at any memory button
location to create a DSS memory button. When this button is pressed, any active outside
call is automatically placed on hold and an intercom call is automatically made to that
previously stored station number. The visual indicators of the stations programmed at the
button locations form a busy lamp field (BLF). The BLF conveys station status to the
user. An autodial number can also be programmed as a secondary function at every
DSS/BLF memory location. No class of service is required.
See also, Automatic Dialing.

Distinctive Ringing

The ringing cadence of an incoming call is the same as the ringing cadence of the
TELCO, PBX, or CENTREX system. The ringing cadence of an intercom call presents
two tone bursts sounded every four seconds.
See also, Ringing.
Do Not Disturb
Any station can be set to a do-not-disturb mode (DND) using the designated DND
programmable button and associated indicator (indicator will light when DND is active).
While in the DND mode, the station will not ring on any incoming call nor will it accept
an intercom call. A party making an intercom call to a station set in the do-not-disturb
mode hears a fast busy tone. The feature cannot be overridden by the calling party unless
the override feature is enabled. The DND feature is used with the departmental calling
feature to provide a station wrap-up mode and a station off-duty mode.
A – 30 Digital Telephone System Features
IMI66–107