Toll Restriction Tables - Comdial G0408 Manual

IMI66–107
3.19

Toll Restriction Tables

The toll restriction feature uses entries that you make in 16 different tables to prohibit some or all stations
from calling a wide range of number combinations. In order for toll restriction to take effect, you must
complete the following three-fold process:
•
you must program entries in one or more toll tables,
•
you must assign toll tables to all appropriate lines,
•
you must assign toll tables to all appropriate stations,
•
After you program the toll tables and assign them to both a line and the station that uses that line, the
system activates the programmed toll restriction at the station.
You should make a record in Chapter 4 of all programming decisions that you make—it will help you
keep track of what you have done and will help you troubleshoot any problem that might arise later.
NOTE: A lighted LED next to the programming button for the selection indicates the current
configuration. When a single button provides a toggle (on/off) action, the lighted LED
indicates the active feature.
The first step in any programming sequence is to enter the base level. Once in this mode, you can dial the
feature code for any desired configuration. Enter the base level with the following procedure:
press INTERCOM then dial # 7 4 6 . When you want to end the programming, press the SPEAKER
button to end the programming procedure and return the system to normal operation.
Digital Telephone System
System Programming 3 – 147