Call Waiting Tone - Comdial G0408 Manual

IMI66–107
Unanswered Call Transfer Recall Timing
A transferred call that is unanswered after a pre-programmed length of time will return to
the station that transferred it. The system will return the call to both attendant stations
when the tandem attendant feature is enabled. When LCD speakerphones are employed,
the display will show the station number or name as well as the line number that is being
re-called. The system class of service programming determines the recall time for an
unanswered call transfer.
Unscreened Call Transfer
A user can transfer a call to another station without first announcing it. The transferred
call will camp-on to the other station where it will ring and await an answer. The call will
automatically ring back to the transferring station after a programmable recall period.
There is no limit as to how many calls users can camp-on to another station. A
transferred call will only ring if the station is idle. If the station is busy, the call will wait
until it is idle before it rings. The programmer can use the system class of service
programming to set the recall time for an unanswered transferred call.

Call Waiting Tone

A telephone user can signal a busy station with the call waiting tone to indicate that he or
she wishes to contact them. Users dial a special code to activate the call waiting tone.
Caller ID
The central office sends Caller ID data along lines assigned to the Caller ID service.
Caller ID information is displayed at a system LCD speakerphone only if the
programmer assigns that telephone to the Caller ID service, and then only for those
Caller ID lines that are assigned to that station and arranged to perform as follows:
• ring audibly
• can be answered by user pressing button for the ringing line
• are transferred to the station.
The station receives Caller ID data between the first and second rings. A programmer can
enable the first ring for a line assigned to Caller ID to be either audible or silent.
Selecting the "silent" option ensures that the Caller ID data is displayed prior to ringing,
nearly eliminating the loss of Caller ID data.
Station users may automatically retrieve and dial the last Caller ID number displayed at a
station by using a preprogrammed SAVE recovery button. Because the programmer can
store the local area code and up to 100 6-digit area code and local office codes, ten-digit
Caller ID numbers can automatically be transformed into a format that can be dialed.
Digital Telephone System
Digital Telephone System Features A – 15