Flexible Ringing Assignments; Direct/Delayed Ringing - Comdial G0408 Manual

IMI66–107
3.7.12

Flexible Ringing Assignments

You can enable different ringing assignments for individual lines and stations.

Direct/Delayed Ringing

Description: You must program ringing assignments on a per station/per line basis. You can control
ringing for every line that has appearance at a station assigning immediate, or direct,
ringing to some lines and delayed ringing to others.
NOTE:
To Program: 1. Dial 54.
2. Dial 1
NOTE:
3. Select line ports for ringing (LED On = Selected Ports).
4. Dial # when all line ports are selected.
5. Select station ports (LED On = Feature Assigned)
6. Dial
To clear current setting, repeat procedure.
Do not program direct ringing for lines that you assign to the direct
department calling feature.
—OR—
Dial 2.
For no station ringing, skip step 3 and make no line selection.
—Line port 1–14 = Dial 01–14 or press A1–A14
—Line port 15, 16 = Dial 15, 16 or press B1, B2
—Line port 17–24 = Dial 17–24 or press HOLD then press A1–A8.
—Station 10–57: Dial 10–57 or press C10–C57.
when all station ports are selected
—OR—
dial for next station/line ringing assignment
—OR—
dial for configuration mode.
Digital Telephone System
"STA/LINE CONFIG."
"DIRECT RING"
"DELAY RING"
System Programming 3 – 59