1. Manuals
  2. Brands
  3. Comdial Manuals
  4. Telephone System
  5. TO308
  6. System manual

Comdial TO308 System Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TO308 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Comdial TO308

Summary of Contents for Comdial TO308

  • Page 2: Table Of Contents

    Table Of Contents Table Of Contents Introducing The Unisyn System 1.2 Using Related Publications 1.3 Getting To Know The Unisyn System 1.4 Understanding The Hardware l-4 l-10 1 S Knowing The General Specifications 1.6 Seeking Technical Assistance l-12 2.1 Using Chapter Two 2.2 Using The Right Tools 2.3 Instahing The Cabinet 2-2 2.4 Connecting The Power 2-4...
  • Page 3 Table Of Contents 3.1 Using Chapter Three 3- 1 How To P rogram 3-1 3.2 Understanding 3.3 Understanding System Programming 3.4 Master Clearing and System Defaults 3.5 ‘Programming The System 3.6 Programming The Lines 3-14 3.7 Programming The Stations 3-19 3 .

  • Page 4: Introducing The Unisyn System

    System Overview Introducing The Unisyn System- 1. I Using This Book This manual for the Unisyn telephone system, provides step-by-step instructions fo programming the system. We have designed the manual with you, If you, are unsure abou tried to “walk you through” all of the steps needed to fully install an installing the system, read through this book contains five chapters, each of which has a unique purpose.

  • Page 5: Using Related Publications

    System Overview 1.2 Usina Related Publications We have not included some information, such as general user infor information in the following related publications. IMI 01-001 Compliance Requirements To FCC Rules and Regulations Part 68 and 15 IMI 01-005 Handling Of Electrostatically Sensitive Components 1.2.2 User Information Speakerphone System...
  • Page 6 System Overview Optional PA Industry-standard non-electronic telephone (Power fail interface) Typical printer Typical machine Typical answering machine Typical station Typical personal computer (For remote database upload/download) must have an IST board. (If have TXIST board installed either the bridged IST or stand alone IST can be used for power fail.) Figure 1.1 System Options...

  • Page 7: Understanding The Hardware

    Figure 1.2 shows the four models of the common equipment and their dim modem and functional style. There are four models of the Unisyn common equipment (two for domestic use and two for in with different station and line capacity. CO / PBX CapacrRy Station Capacity TO616 TO308...
  • Page 8 System Overview 12 l/4” 23 314’ , TO308...
  • Page 9 1.4.2 Understanding The Options Boards The following list describes each You can add any or all of the optional boards into the Unisyn system. its function. Refer to Figure 1.3 for board installation locations. Unisyn Industry Standard Telephone (TXIST) Board-makes system compatible with...
  • Page 10 System Overview TX232 Board *Jumpers 2 Board 1 Metering Board 2 (International Only) NOTE: You must remove the jumpers next to the corresponding TXIST and TXCMX board upon instillation. The board will not function with the jumpers installed. Figure 1.3 Optional Boards (TO616 shown)
  • Page 11 System Overview 1.4.3 Knowing The Stations You can install many different types of telephone stations, either proprietary Unisyn electroni microprocessor-controlled devices, or industry standard, with not only multiline pickup but also single button access to features available from the serv You can program each telephone station to have a unique se features and operating parameters Unisyn system, as will any industry standard telephone, or accessory such as a facsimile machine or modem, (with...
  • Page 12 System Overview 1122X Figure 1.5 Telephone Stations...

  • Page 13: Knowing The General Specifications

    System Overview Base Unit 3-Line, 6-Line, 8-Station Q-0308, System Capacity Lines: stations: Intercom Paths: Proprietary Maximum Simultaneous: Intercom Conversations: 3 Power Requirements-Domestic (Fully loaded system) 117V +/- 10 % 60 H Z Single-phase AC Power: 0.4 A 0.8 A 80 VA Heat Dissipation: 120BTU/hr Power Requirements-International (Fully loaded system)
  • Page 14 Clock Retention After Power Loss Registration-Number (Key System) (Hybrid System) Ringer Equivalence Number Load Number 3 x 8 System TO308 Product Codes 6 x 16 System TO616 3 x 8 System (International) 6 x 16 System (International) Universal IST Board...

  • Page 15: Seeking Technical Assistance

    If your common equipment or an individual station should need repair after the warranty, you m defective equipment to Comdial. Comdial will, at their option, either repair the equipment or replace it w remanufactured unit. There is a fixed charge for a repair. For information on repair charges, pl...
  • Page 16 System Overview 1.6.2 Finding The Fuses Comdial has included a fuse in the common equipment to protect it against short circuit dama The fuse G located on the left side of the common equipment cabinet. If you should need to replace a fuse, always replace the f one of the same value and type;...
  • Page 17 Installing The System Installing The Unisyn System 2.1 Using This Chapter 2.2 Using The Right Tools 2-l The Cabinet The Power 2-4 2.4 Connecting 2.4.1 Connecting AC Power 2-4 2.4.2 Connecting A Battery Back-up 2.4.3 Grounding The System 2-7 The Lines 2-8 2.5.1 Connecting The Line Jacks 2-11...
  • Page 18 Installing The System Checking The System 2 . 8 2.8.1 Checking The Installation and Wiring 2-25 2-25 2.8.2 Checking The Wiring Resistance to Ground Powering Up The System And 2.8.3 2 - 2 5 Doing A General Check 2-25 2.8.4 Checking The DC Voltages to The Station Ports 2 - 2 6 2.8.5...

  • Page 19: Using Chapter Two

    Installing The Unisyn System Using Chapter Two Chapter two provides you with a step-by-step procedure for installin information in the Always do a pre-installation check to make sure you have the necessary equipment and documentation. Use the following list as a general guideline for installing the system. This list is by no means the only possible order for installation.

  • Page 20: The Cabinet

    Installation Before you mount the cabinet, consider the following list in the layo might be helpful to put a check-mark in each box as you complete system. 15 AMP circuit, with a third-wire ground, supplied to a standard e jacks must be 25 feet or less.
  • Page 21 Insert the two top screws into the mounting surface and Step 5 tighten them to within approximately l/&inch of the surface. Hang the cabinet on the top screws using the mounting Step 6 holes located on the rear of the cabinet. Note that these holes are elongated with an enlargement at one end.

  • Page 22: Connecting The Power

    Connecting The Power 2.4. I Connecting AC Power For a domestic system, use a dedicated electrical outlet For an international system supply according to input AC voltage figure 2.3. Be sure to adhere to the following when connecting the power: q A plug-in power line surge protector should be (see 1.5 for surge protector specifications).
  • Page 23 Installation TO308 TO616 Domestic 120 VAC M a i n P W B International 120 VAC International 220 VAC Fuse Holder Fuse Holder Main PWB Figure 23 Domestic and International Power Co...

  • Page 24: Connecting A Battery Back-Up

    CoUld result from improper connection. The optional Comdial model BBUOl, BBU02, BBL02 external battery assembly provides a minimum of one hour of operation should the AC power to the system be interrupted. To calculate the actual minimum battery back-up time use the following equation: (0.8) e...

  • Page 25: Grounding The System

    Before installing a battery backup, check that the following voltage measurements are all accurate: Correct voltage battery charger circuit without batteries connected follows: between positive battery between negative battery (contact Comdial voltage higher lower), Nominal voltage each batteries Each fully charged disconnected battery should exceed voltage completely...
  • Page 26 Installation Once you have mounted the common equipment, it is time to begin Connect the common equipment telephone line jacks to a Type to the telephone company’s demarcation point. Individual 4-position modular jacks may be between the common equipment and the telephone company line connections (see Section 2.5.2). The line connections for the common equipment cabinet are standard modular plug/jack connections.
  • Page 27 T0616, T0616-INT Typical Common Connection RING 2 RING 1 RING 6 ‘TYPE 66M-XX CONNECTOR BLOCK . INDIVIDUAL 6POSITION MODULAR JACKS Figure 2.5 Typical Common Equipment to CO Line Connections...

  • Page 28: Connecting

    Table 2.1, below, shows the connections for each line on each common equipment cabinet. Table 2.1 T0308, T03084NT TO61 6, TO61 6-INT 2-10...

  • Page 29: Protecting The Lines

    2.5.2 Protecting The Lines Transient voltage spikes, if induced onto CO or equipment. The telephone company offers basic protection against this condition but it is us the central office circuits. While this supplied surge protection will also provide some protection t equipment, it should not be relied upon for total protection.

  • Page 30: Connecting The Stations

    Usually, the connections you make between the common equipmen blocks that are cable connected to the common equipment Xl-pin m allowed from the common equipment to the stations is 1000 feet for standard telephones using If spare conductors exist in the cables that are run between the good practice to connect them to earth ground to help prevent them interference into the system.
  • Page 32 2.6.4 Connecting A Three Line, Ei ht Station Common Equipment Table 2.2, below, shows the color coded connections on a type system (TO308, TO308-INT). Table 2.2 Three Line, Eight Station Common Equipment Connections J-l CONNECTIONS CLIP WIRE TERM. PAIR WIRE COLOR PAIR STA.
  • Page 33 Installation 2.6.5 Connecting A Six Line, Sixteen Station Common Equipment (T0616, TO6164NT) Table 2.3, below, shows the color coded connections on two type station (T0616, Table 23 Six Line, Sixteen Station Common Equipment Connections PAIR PAIR TERM. STA. LOCATION WIRE COLOR COLOR STA.
  • Page 34 Options 2.7 Ins falling Sys tern may consider an option board or a power failure station connection, fo option. The following is a list of the non-mandatory options: Power Failure Station(s)--Addition power fail stations available through Common Audible Interface Auxiliary Station Interface External...
  • Page 35 NOTE: When power is interrupted or restored, the powerfail relays will interrupt calls in progress. System Configuration Power Fail Connection Base System Station IO-CO 1 TO308 TXIST in Slot 1 Station 13-CO 2 TXIST in Slot 2 Station 17-CO 3 Base System...
  • Page 36 2.7.3 Connecting A Common Audible And Auxilraty Station Interface You can connect an external audible ringer, such as a loud bell or flashing light, that will oper receives an outside call. The contact points for this operation are dry, meaning that the external ring have its own power supply.
  • Page 37 (Wiring shown with slave relay connection for high current application Power Common Equipment Source for 24V @ 1A Max. Common Audible or Input as Slave 48V @ SA Max. Auxiliary Station Required Relay Interface Relay 04 Diode Recommended Slave Source for Input as Relay Signalling...
  • Page 38 In tetface-Sta tion PA Porf You can program any station port, except for station 10, as a PA port. The station port that you choose a station voice path to an external paging amplifier. You can configure the external paging amplifier so external music source plays music over the PA.
  • Page 39 Installation Interface-Line Port As an external paging port, the line You can program a line port to be an “auxiliary port” external paging device. Any station with that line appearance port can be used to couple a station voice path to an external paging device. can use the PA port simply by selecting the line.
  • Page 40 2.7.6 Connecting A Data Device With the TX232 module, the system provides computer (PC), or modem for remote upload the following: When personal computer perform class service programming, connect Data Port A (future feature). When serial data printer (and Caller future), connect RS232...
  • Page 41 RTS Out Typical DB 9 Connection RS-232C Non-null Cable Typical Personal Computer TX232 Serial SMDR Printer Figure 2.11 Typical Data Device Connection 2-23...
  • Page 42 2.7.7 Music Interface If music is to be part of the system, connect a music source to the common equipment music jack) provided for this purpose. The impedance of this input is approximately 600 ohms. Lev music source may be necessary. The system will not support background music at stations and auxiliary devices connected.

  • Page 43: Checking The System

    2.8. I Checking The Installation and Wiring Verify that the common equipment is mounted properly and that all wiring is correct. Check all of the following wiring carefully: the chassis ground wiring, the line port wiring, the station port wiring, the AC accessory wiring.
  • Page 44 Correct voltage of battery charger circuit without the batteries connected is as follows: be and +13.8V DC for the positive battery and between (contact Comdial if the voltage is higher or lower), Nominal voltage of each of the batteries is 12V DC,...

  • Page 45: Isolating System Failures

    2.9. I Checking The System Status Indicator A green LED located on the common equipment cabinet near the music port is the system sta system has power, this indicator If the indicator flashes after power-up, it is indicating a processor failure. If it still shows a flashing Unplug and reconnect the AC power to the power supply and observe the LED indication.

  • Page 46: Fcc Rules And Regulations

    FCC Information 2.10 FCC Rules And Regulations This electronic key system complies with Federal Communications registration label on the common equipment contains the FCC regi the model number, and the serial number or production date of the 2. IO. I Notification To Telephone Company Unless a telephone-operating company provides and installs the system, the telephone opera provides the lines must be notified before a connection is made to them.
  • Page 47 FCC Information FCC regulations do not permit repair of customer owned equipment by anyone except the manufacturer, their author&l agent, or others who might be authorized by the FCC. However, routine repairs can be made acco to the maintenance instructions in this publication, provided that all FCC restrictions are obey 2.
  • Page 48 Programming Contents Programming Unisyn 3.1 Using This Chapter 3.2 Understanding How To Program 3.3 Understanding System Programming 3.3.1 Using A Telephone To Program 3.3.2 Master Clearing The System 3.3.3 Finding The Programming But 3.4 Master Clearing And System Defaults 3.4.1 Master Clearing 3.4.2 Defaulting The System 3-4...
  • Page 49 Programming Contents The Lines Programming 3 . 6 . 1 I n t r o d u c t i o n 3 - 1 4 3.6.2 Abandoned Hold Release 3-15 3 . 6 . 3 A u t o m a t i c P r i v a c y 3 - 1 5 3 .
  • Page 50 Programming Contents 3-33 3.8 Button Mapping Automatic Call-back Button 3-33 3.8.1 Blank Buttons 3 - 3 4 3.8.2 Call Forward Button 3-34 3.8.3 Do Not Disturb Button 3-35 3.8.4 3.8.5 DSS / BLF Button 3-35 3.8.6 Line Button 3-36 Line Group Button 3-36 3.8.7 3 - 3 6...

  • Page 51: 3, Programming The System

    System Programming Programming The System - The benefit programming the customer’s new system is the most intricate and of the Unisyn system is that you can program every system differen Chapter 3 is divided into six programming sections: System, Lines, Stations, Button Mapping,...
  • Page 52 System Programming function can be done under this type of programming. Class of service programming include Line programmin g . The password for COS programming is mode. You must program from either station 10 or 12. 3.2.2 Administration Programming Administrators can use administration programming to program all system features except lin master clear.

  • Page 53: Understanding System Programming

    LCD speakerphone. While you can install any non-LCD proprietary telephone and use it for pr feedback of the programming operations will not be available. NOTE: Do not program a domestic system (TO308, TO61 6) with an industry-standard telephone. 3.3.2 Master Clearing The System...

  • Page 54: Defaulting The System

    System Programming 3.4 Master Clearing And Svstem Defaults You can return the entire programming configuration to the factory can also return the individual system, line, and station class of serv the system, line, and station default procedures. The operating para factory settings will provide satisfactory performance in a broad ran Not only does the master clear procedure return ALL programmed variables to a default state operation, but it...

  • Page 55: Defaulting The Stations

    System Programming 3.4.4 Defaulting The Stations Returns the station configuration features to factory settings. Description To Program: 1. Press ITCM Dial +N # 7 4 6 +k MODE” Dial 50 “STATION DEFAULT ” Dial 00 to default station ports system-wide, Select individual station port to be defaulted: Station 10 Dial +i + for next station to default, Dial +C % for configuration mode or SPKR to quit.
  • Page 56 System Programming Programming the system means that you are setting the parameters that will be true system wide. If you are unsure whether or not you are programming the correct function, check chapter 5, Description System Features, in the back of this manual for a full definition of the feature. You should make a record of all your programming decisions -it will help you keep track of what you have done and will help you troubleshoot any problem that might arise later.

  • Page 57: Data Baud Rate

    System Programming 3.5.2 Data Baud Rate Description: The speed or baud rate of the data bit stream, which carries the SMDR and configuration data between system and an external data device, must be programmed to match the requirements of the data devic NOTE: If you use XMODEM protocol for data transfer between a PC and the common equipment, you must use To Program: 1.

  • Page 58: Music On Hold

    System Programming 3.5.4 Exclusive Hold Description: This feature prevents a telephone user at one station another station. You can enable or disable it system-wide using this procedure. Default = Disabled (Al LED = Ofl 1. Dial 23 “XXXXXXX To Program: HOLD”...

  • Page 59: System Speed Dial

    System Programming System Clock The system clock maintains current date and time information. The system provides this information to Description: LCD speakerphones for display. Set the system time with this feature. The system attendan access to this feature. NOTE: You can enter any attendant programming with the base level entry of ITCM t #. Dial 01 “SET CLOCK ”...
  • Page 60 System Programming 3.5.9 Tone or Voice Signaling Intercom calls can be tone signaled or voice signaled. Use this programming feature to select the system’s Description: signaling choice. With either method set as the system’s fast choice, the user can choose the other method as needed by pressing the ITCM key again.
  • Page 61 System Programming 3.5. II Timing Features-PA Port You can set PA Description: system as long as necessary without timing out. The system default is set for no timeout option. Default = No Timeout (Al3 LED = On) To Program: Choose Timeout length: Press Al or dial 1 = 30 sec.
  • Page 62 System Programming The system can generate either a line disconnect (recall) or a host system feature access sig Description: depending upon the programmed time. Default = 2 sec. (Al2 LED = On) 1 . Dial12 To Program: 2. Select time: Dial 1 or Press Al = 0.08 sec.
  • Page 63 System Programming 3.5.15 Timin Features-Unanswered Call ransfer Recall Time A transferred call that remains unanswered after a programmed length of ti Description: station for answering. Set the transfer recall time with this programming procedure Default = 20 sec. (A2 LED = On) 1.

  • Page 64: Programming The Lines

    Line Programming 3.6 Programming The Lines 3.6. I In troducfion You can program the parameters for individual lines by using line class of service programming. The programming decisions you make, therefore, will only be true for that line and not for the entire telephone system, system configuration.

  • Page 65: Abandoned Hold Release

    Line Programming 3.6.2 Abandoned Hold Release Description: When a distant party abandons a hold condition and disconnects from a line (hangs up), the central sends a positive disconnect signal to the Unisyn telephone system. This signal can be either 350 msec. Check the signal length from the telephone company and program all of the central office line ports to match that signal length.

  • Page 66: Line Groups

    Line Programming 3.6.5 Line Groups Group outside lines of the same type together for dial-up outgoing access. Access codes for the line groups Description: are as follows: Group 1 = Dial9 or Dial 0 (See Section 3.5.1) Group 2 = Dial81 Group 3 = Dial82 Group 4 = Dial83 Ask the local telephone...

  • Page 67: Line Port Functions-Line Disable

    Line Programming 3.6.6 Line Fort Functions-Line Disable Description: You can take a line port out of service when necessary (because of defect, for example) usin programming procedure. Return the line to service with the central (Section 3.6.8). Default = None disabled (Bl - B6 LEDs OfjJ To Program: “DISABLE LINES”...

  • Page 68: Pulse/Tone Switchable-Pulse

    Line Programming 3.6.9 Pulse/Tone Switchable-Pulse If the installer has connected rotary dial lines to the system, you must condition those line p Description: dial ports. NOTE: The user can switch from pulse (rotary dial signaling) to tone (dual tone multiple frequency - DTMF) from accessing special circuits requiring DTMF tones, such as banking machines, when they need to do so a rotary dial line by dialing #after dialing access number.

  • Page 69: Programming The Stations

    Station Programming 3.7 Programming The Stations 3.7.1 Introduction Station programming means that you are programming the functions for one particular station necessary, it is a good idea to do station programming after you have done system and line p should keep a record of programming decisions that you make-it will help you keep track of w and will help you troubleshoot any problem that might arise later.

  • Page 70: All Call And Zone Paging

    3.7.3 All-Call and Zone Paging Description: Telephone users can receive voice announcements through their telephone loudspeak external paging amplifier and speaker connected to a PA port. They can transmit these voice announcements with their telephone handsets. You can arrange the programming so t make announcements to stations located in certain areas of the site or to all of the stat You can also arrange stations to originate but not receive zone pages (or receive but not originate).

  • Page 71: Automatic Hold

    Station Programming Description: When you enable this feature, the telephone user can automatically place an she or he presses another line button to answer a second call. Default = Not enabled (AH LBDs = Off 1. Dial To Program: 53 “STATION FEATURES” 2.
  • Page 72 Station Programming 3.7.7 Automatic Privacy Description: You can make a line private or non-private. In the private mode, a station has exclusive a call. T his information is repeated in 3.6.3. You do not need to program this feature agai done so in 3.6.3.

  • Page 73: Intercom Hunt Group

    Station Programming 3.7.9 Call Forward On Busy/Ring - No Answer Description: The system can automatically forward busy and ring-no answer calls. When a user places a call to station A, for example, that call can be automatically forwarded to any other station associated group.

  • Page 74: Data Security Port

    Station Programming 3.7. I I Call Origination Denied (Line Origination Denied) Description: You can deny users of selected stations the ability to originate calls on specified lines. prevent the user from answering incoming calls on these lines. Default = None denied (AU LBDs = Off) defaults m NOTE: This feature and all level 54 programming features are toggle on/toggle ofl enabled, dialing the code automatically disables the feature.

  • Page 75: Dedicated Itcm For Attendant 3 - 2

    Station Programming An intercom link can be reserved for exclusive use by a station. This feature should be used for stations Description: that process a high rate of calls, usually the attendant. Default = None dedicated (AU LEDs = O&l To Program: 1.
  • Page 76 Station Programming Direct/Delayed inging You must program ringing assignments on a per station/per line basis. You can control ringing for every Description: line that has appearance at a station-assigning immediate, or direct, ringing to some lines and delaye ringing to others. Default = Direct ring all lines on stations 10 and 17 (Bl-B6, AI, A8 LEDs = On) NOTE: This feature and all level 54 programming features are toggle on/toggle 08 If the enabled, dialing the code automatically disables the feature.
  • Page 77 Station Programming Night Ringing /# Description: After you have assigned Night Ringing to the stations and lines desired, the attendant m feature to activate night ringing. Default = (Al LED = Ofi for easy activation. NOTE: You can program a speed dial button at the attendant’s telephone with a Dial 03 “NIGHT XFER XXX ”...

  • Page 78: Headset Interface 3 - 2

    Station Programming 3.7.20 FIexible Station Numbering The system supports a flexible station numbering plan for calling individual stations. You can program Description: each station port to respond to the dialing of any available number between 10 and 79, 100 and 799, or 1000 and 7999.

  • Page 79: Idle Line Preference 3 - 2

    Station Programming 3.7.23 Idle Line Preference Description: When you enable idle line preference, a station will automatically connect to any assign when the user takes the station off hook. Default = None enabled (All L,EDs = OjjI NOTE: If you have already assigned prime ITCM, you must remove it in order to assign Idle Line Preference. Dial 54 ‘STA/LINE CONFIG.

  • Page 80: Personal Ringing Tones 3 - 3

    LCD LCD-LCD Speakerphone Comdial Voice Mail Default = LCD (AI-Al6 LEDs = On) You should program feature Port Definition, before you do any other station programming. AU programming for a port is lost when the port is redefined here.

  • Page 81: Prime Line-Prime Group And Prime Intercom

    Station Programming 3.7.27 Prime Line-Prime Group And Prime Intercom Description: If you assign a group of lines, an intercom line, or one individual line to a particular station for use as prime line, the station automatically selects that line for use when the user takes it off-hook.

  • Page 82: Ringing Line Preference

    3.7.29 Ringing Line Preference Description: When you assign this feature to a station, that station will automatically answer a ringing goes off-hook. The ringing line shows as an orange LED (only when you have canceled Preference). IST ports must have ringing line preference assigned. NOTE: Without Direct Ringing assigned, Ringing Line Preference will only function on transferred calls.

  • Page 83: Button Mapping

    Station Programming Button Mapping (Non-Square System Configuration) Description: You can assign (map) every programmable “A- field” and “B-fie station select (DSS) buttons that provide quick access to syste provide telephone users one-button access to features, or to be locations for the station user. You can also assign B-field buttons to be line select outside lines.
  • Page 84 3.8.2 Blank Buttons Description: Blank those buttons that you want to be speed dial buttons. NOTE: When blanking buttons, be sure a previously assigned button is idle (feature not selected by you blank it. 1. Dial 56 “‘BUTTON MAPPING” To Program: 2 .
  • Page 85 Programming 3.8.4 Do Not Disturb (DND) Button Pressing the DND button prevents other stations from ringing the DND station. Description: To Program: Dial 56 “BUTTON MAPPING ” Dial 07 ‘ASSIGN DND CODE ” Al - A16, Bl - B6 Select button to be programmed: Press Select station ports to be programmed with a DND button: Station 10 - 25, Dial 10 - 25 or press Al-Al6...
  • Page 86 Station Programming Line select buttons provide access to outside lines. Description: Dial 56 ‘BUTTON MAPPING ” To Program: 1. Dial 02 “ASSIGN LINE” Select button to be programmed:- Press Select line ports to be assigned.- Line port 5 . Repeat steps 3 and 4 until all lines are assigned 6 .
  • Page 87 Station Programming 3.8.9 Dual Intercom Button Description: You can assign a second intercom button to stations that may make many intercom ca To Program: 1. Dial 56 MAPPING ” Dial 05 “ASSIGN 2ND ITCM ” Select button to be programmed:- Press Al - A16, Bl - B6 Select station ports to be programmed with a second intercom button: Station 10 or press Al-Al6...
  • Page 88 Station Programming 3.8.12 Shift Button You can use a shift button to access autodial numbers that are programmed under DSS buttons. At default, Description: the shift button appears at the location of your DSS/BLF button. To Program: Dial 56 “‘BUTON MAPPING ” 2.

  • Page 89: Voice Mail

    NOTE: The +K denotes that this feature is currently a future feature. The Unisyn system supports the use of the Comdial proprietary voice mail system. In addition to the required programming task of identifying the station ports as voice mail ports, there are several other programming considerations associated with voice mail operation that are optional for use as needed.
  • Page 90 Voice Mail 3.9.2 Voice Mail Port-Direct Ringing For Automatic Attendant Operation Description: With this feature, the voice mail system automatically answers any line that is ringing at a voice mail port. You must choose a ringing assignment for the lines that you have assigned to the voice mail ports before the voice mail system can provide the automatic attendant feature.
  • Page 91 Voice Mail 3.9.4 Voice Mail Port-Night Rin For Automatic Attendant 8 You can program the voice mail port to ring differently in night mode. Description: Default = No night ring (All LJ3Ds = Ofi 1. Dial 54 To Program: Dial 3 “NIGHT RING” Select line ports I31 - B6 Line port l- 6 = Dial 01 - 06 or press...
  • Page 92 Voice Mail 3.9.6 Automatic Transfer of Voice Mail Description: When you include a voice mail system with the Unisyn telephone system, use this prog arrange for an immediate line transfer without delay from the voice mail system to a sta NOTE: Do not tarn on this feature if tarn on the screen an&or confirm options provided by the voice mail...
  • Page 93 Voice Mail 3.9.8 Voice Mail Transfer on Busv Description: Normally, the voice mail system automatically routes calls that are made to a busy station to that stat voice mail box. Alternately, you can arrange for the system to alert the busy station when the voice mail system is attempting a call transfer to it.
  • Page 94 Toll Restriction Table Confiuuration In order for toll restriction to take effect, you must perform all of the Program entries more toll tables Assign toll tables appropriate lines. Assign toll tables appropriate stations. After program toll tables, Description: before the system will activate any programmed toll restriction at the station. Determine the types of dialing restrictions that you wish imposed on the system.
  • Page 95 Toll Restriction Toll Restriction Configuration NOTE: A lighted LED next to the programming button for the selection shows the choice you have selected. W h e n a single button provides a toggle (on/ofJ) action, the lighted LED indicates the active feature. The first step in any programming sequence is to enter the base level.
  • Page 96 Toll Restriction 3.10.3 Assign Toll Restriction Tables To Stations Assign the toll restriction table to each appropriate station. Description: Default = None assigned. To Program: Dial 73 “ASSIGN TOLL-STA. ” Dial 01 - 16 for toll tables l-16 to be assigned to station Press Al - Al6 for tables 1-16 (LED On = Selected table) Dial # to finish entry Select station ports to be programmed: Station 10 - 25, Dial 10 - 25 or press Al - Al6...
  • Page 97 Toll Restriction 3.10.5 Assign Toll Restriction Tables To System Speed Dial Calls Description: When you enable this feature, the system applies toll restriction tables that you have as the system speed dial calls that users make from that station. Default = None assigned. 1.

  • Page 98: Programming Reference Chart

    System Programming Programming Reference Chart The following chart lists all of the reference., You do not have to program the system in this order. Code # Feature Dedicated Intercom For Attendant System Clock Intercom Hunt Group System Speed Dial Call Forward on Busy Night Mode Flexible Ringing Assignment Of PA Port Music On Hold...

  • Page 99: Feature Code Numbering Plan

    System Programming 3.12 Feature Code Numbering Plan Feature Dialing Code All Call Page ITCM 87 Attendant Calling ITCM 0 (or ITCM 9) Automatic Redialing Programmed Button /Interactive Bu Background Music Activate Automatic Callback ITCM, Extension, Cancel All Calls Call Forward ITCM #+ 5, Extension Cancel Directed...

  • Page 100: Programming Records 4-I

    System Records Programming Records - Attendant O = A t t 9=Att Default = 0 For Attendant Dialing Feedback M o n o D T M F Default = Monotone Tone / Voice Signaling Tone Voice Default = Voice Exclusive Hold Enable Disable = Disable Make / Break Ratio...
  • Page 101 System Records (Be sure to record a line or line NUMBER NUMBER NUMBER 10 I...
  • Page 102 System Records Recall / Flash T i e 1.0 set 1.5 set 2.0 set 3.0~~ Default = 2 seconds Pause Time 1.0 set 1.5 set 2.0~~ 3.0 set 5.0sec 7.5 set 1Osec 15 set 20 set Default = I second 30 xc 60 set 120 set 180 set 240 set 300 set 360 set 420 set Never Default = 60 seconds...
  • Page 103 Line Records 4.4 Line Confiauration Records Feature...
  • Page 104 Station Records Configuration (Use this sheet as an individual station record or as a record for a block of like copies of this blank sheet as needed to meet the system capacity) Privacy I None/l -6 None IST Distinctive Ringing Default = Distincitve Ringing On...
  • Page 105 Station Records Station Configuration Records- continued Station Button Mapping Record (Complete one record sheet for each station. Copy this blank record sheet as required for additional stations.) DESCRIPTION Bhnk 10 - 57 D N D D o Noi Disturb P r i v a c y Release Intercom Zone Page 1 - 3 Page...
  • Page 106 Station Records Voice Mail Entry Default = Not Enabled...
  • Page 107 Toll Table Records ZMZ-66094 Table Configuration Toll Restriction Tables Toll Restriction Table Toll Restriction Table Type: Allow Deny X Denv Entrv Numbers (16 Maximum) Entrv Entry Numbers (16 Maxim Toll Restriction Table Toll Restriction Table Type: Allow X Deny Type: Allow D e n v Entrv Numbers (16 Maximum)
  • Page 108 Toll Table Records Toll Restriction Tables Table Assignment: Lines Stations Toll Restriction Table Type: Allow D e n y Toll Restriction Table Type: Allow D e n y Toll Restriction Table Toll Restriction Table Denv Type: Allow D e n y Entry Numbers ( 16 Maximum)
  • Page 109 Toll Table Records IMI-66094 Assign Toll Restriction Tables To Lines Toll Restriction Tables To Lines Port Tables Default = All Tables Assigned To All Ports Assign Toll Restriction To Stations Toll Table Assignments Station 10 ! 16 1 17 I 23 ! Default = None Assigned 4 - 1 0...
  • Page 110 Toll Table Records 4-11...

  • Page 111: System Features

    Description Of System Features System Features Abandoned Hold Release-3.6.2- When a distant party abandons a Hold condition (hangs up), causing an interruption in the Iine current, the system drops the line from hold and returns it to service. You can program the time interval between hang-up and line-dro between either 50 msec.
  • Page 112 Description Of System Features Automatic Hold For Intercom-3.7.6- If a user selects the second intercom line while a intercom call to be automatically placed on hold. Automatic HoM-Transfer To Intercom (Answer Hold)-3.7.5- If the intercom line is selected while an outside line call is active, this system feature causes the outside automatically placed on hold.
  • Page 113 Back-up Interface -2.4.2- Battery We have made it possible to attach a Comdial-provided optional battery back-up kit to the common equipment. Battery back-up gives full uninterrupted system power in case of an AC power loss. The switching and trickle charge circuitry are in the common equipment, while batteries, chassis, and cable are packaged as a separate optio When plugged into an active AC power source, the common equipment constantly charges the attached batteries with a trickle current.
  • Page 114 Description Of System Features Call Forwarding-Busy /Ring-No-Answer-3.7.9,3.X3- The system The system can automatically forward busy or ring-no answer calls to a different station for answering. sends these calls to any idle station associated by intercom hunt Call Pickup-Directed A station user can dial a code, followed by the extension number of a ringing station, to answer the class of service programming is required.
  • Page 115 Description Of System Features Use class of service (COS) programming to configure and assign all system, line, station, and special purpose operating features. Enter COS programming by dialing an access code over the intercom line. System administrators can enter COS programming with another code to re-program any system, station, or special purp operating feature that may require change at a later date.
  • Page 116 Description Of System Features Data Security-3.7X- Data security prevents any type of tone with the feature. This feature prevents interference to non-voice from occurring when you are using the port as an auxiliary bridged device or a stand-alone IST data port. Dedicated Intercom for Attendant-3.7.13- This programmable feature ensures that an attendant at a principal calls to the stations.
  • Page 117 Description Of System Features Dual Intercom-3.8.9- This feature provides two separate intercom lines at the same station. One intercom line is fixed, and a user can access that intercom line by pressing the and a user can access that intercom line by pressing the programmable button selected for that purpose. A user would handle call on the intercom lines in much the same manner as he or she would handle outside calls.
  • Page 118 Description Of System Features External Paging Interface-2.7.3,2.7.4, You can program a station port or line port to interface with an external paging amplifier. Users can then access the can dial DTMF tones through the line The line class of service programming arranges a line port for external paging interface, and the statio service arranges a station port for external paging interface.
  • Page 119 Description Of System Features A user can press the MUTE button on a multiline station to block all handsfree answerback response. arrangement will prevent a station user from monitoring another station site using the monitoring ability of the v announce feature. When the user presses the button, all handsfree answerback is disabled thus inhibiting any off-site monitoring.
  • Page 120 Description System Features Intercom Line Timeout Should the intercom line be selected with no dialing or other action taking place, the intercom “times out” after ten seconds, and returns to an idle state. No class of service programming is required. If no intercom is available on a IST telephone, the system does not provide an intercom tone until an intercom does become available.
  • Page 121 Description System Features Manual Hold A button activated feature at each station will place an outside line on hold. Pressing the HOLD button holds the call, provides a distinctive flash rate of the line button indicator, and allows the user to access other station feature programming is required.
  • Page 122 Power Failure Transfer-2.7.1- A power failure line connection is available for connecting industry-standard telephones such as a Comdial mode 2500. These power-fail telephones automatically connect directly to certain lines whenever there is an AC power failure.Normal origination and reception of calls on a power-fail station is possible during the power failure...
  • Page 123 Description System Features Prime Line Automatic-3.7.27- If you program a station for prime line automatic, the system automatically selects the designated outside line, intercom line, or line group when the user takes the handset off hook. Users may pre-empt prime line pickup by selecting another line before lifting the handset.
  • Page 124 Description Of System Features Saved Number Rediul This feature enables a button action to save the first 16 digits of the last number manually dialed from the keypad. The user can redial the saved number at a later time. The saved number is permanently available for later use until the user replaces it with a new number.
  • Page 125 Description Of System Features System Speed Dial-3.5.8- The system provides up to ninety-nine system-wide speed dial numbers. The system speed dial numbers can be up to 16 digits in length and can include numbers, numbers at station 10 or 12 for use at every station in the system. No class of service is required. Tap (Flash) /Recall When host system custom-calling features are available via a hookflash signal, you can program the system the TAP (RECALL) button will generate a “flash”...
  • Page 126 Description System Features Toll Restriction (Night Mode)-3.10.6 You can assign toll restriction tables mode. You can assign these night mode tables to any or all stations in the system . These toll tables work in addition to any tables that may already be assigned to the station. For example: You can program a station-that h no other toll restriction table assigned to receive a toll restriction table that will restrict everything but local calls a will only take effect when the system is placed in the night transfer of ringing mode.
  • Page 127 Index Index Button Mapping Busy /RNA, Call Forward 3.7.9 Abandoned Hold Release 3.6.2 AC Power, Connecting 2.4.1 Cable Clips, Station Access Denied (Line Access Denied) 3.7.2 2.6.3 Cabinet, Installation All Call and Zone Paging 3.7.3 Call-back Button, Automatic All Call and Zone Paging Button 3.7.4 38.1 Call Forwarding On Busy...
  • Page 128 Index Connecting A Six Line, Sixteen Station Common Equipment Cabinet 2.6.5 Connecting The Stations Failure Indications, Checking 2.9.3 Connecting A Power Failure Station 2.7.2 Finding The Programming Buttons 3.3.3 Connecting A Common Audible and Feature Code Numbering Plan Auxiliary Station Interface 2.7.3 3.12 Connecting An External Paging Intet-face-...
  • Page 129 Index Jacks, Connecting The Line 2.5.1 PA Port, Flexible Ringing Assignment 3.7.19 PA Port, Timing Feature 3.5.11 Paired Ports Overload Protection 2.6.2 Key /Hybrid System, Understanding A 2.7.1 Pause Time, Timing Feature 3.5.12 Knowing The General Specifications Personal Ringing Tones 3.7.25 Port Definition 3.7.26...
  • Page 130 Understanding Paired Ports Ove Protection 2.6.2 Understanding System Program Using Chapter Three 3.1 - Using Chapter Two 3.4.2 Using The Right Tools 2.4.3 Using Related Publications 3.3.2 Using A Telephone To Program 3.3.1 3.5.8 Voice Announce Blocking 3.7.30 2.9.1 Voice Announce Block Button 3.813 Voice Mail Interface Voice Mail Port...

This manual is also suitable for:

To308-intTo616To616-int

Table of Contents