Digital Telephone System
3.7.25
Station Disable
Description:
You can disable station ports on a per station basis.
To Program: 1. Dial 59.
2. Select station ports to be disabled (LED On = Disabled)
3. Dial
To enable station, repeat procedure and make opposite selection.
3.7.26
Station Name
Description:
You can assign individual names or category names to stations. These names will then be
displayed by LCD speakerphones when they are called by the named stations. Typical
names could be TEC SER, MKT 1, J Smith. System attendants also have access to this
station naming feature.
To Program: 1. Dial 06.
2. Select station port (LED On = Selected).
3. Dial
4. Refer to table below and compose station name (7 digits maximum).
5. Dial two-digit codes to form station name.
6. Dial
To change setting, repeat procedure and make different selection.
3 – 74 System Programming
—Station 10–57: Dial 10–57 or press C10–C57.
for configuration mode.
—Station 10–57: Dial 10–57 or press C10–C57.
#
to clear current station name.
for next station and repeat steps 2–5
—OR—
dial
for configuration mode.
"DISABLE STATIONS"
"STATION NAMES "
"XXXXXX
"
"XXXXXXX YYYYYYY"
IMI66–107