IMI66–107
G. Press CONTROL C for main menu, and logout from the programming mode.
2. Disconnect the VDT from data port A.
—At this time, the system begins polling data port A every two seconds and waiting for a
response from the Tracker base station.
3. Connect the Tracker base station to the common equipment's RS232 data port A.
—As soon as you do this, the system recognizes its presence and makes the Tracker's Pager
option available to the system users.
NOTE: While the Tracker base station remains connected, the system continues to poll the
port every 10 seconds to verify its presence. This means that if you disconnect the
Tracker base station to reconnect the VDT, you may have to wait as long as 10
seconds for the system to notice that you have replaced the Tracker base station with
a VDT.
Figure 2–38: Connecting The Tracker Base Station
Digital Telephone System
Installing The DSU 2 – 77