Converting Button Designations - Comdial G0408 Manual

IMI66–107
3.2.3

Converting Button Designations

When you first power a new system with no telephones connected, it defaults its station ports as
follows:
When you connect a telephone to a powered-up system or when you turn on the AC power to a
system after you have connected a telephone to it, the system automatically button maps the
telephone according to the type of software cartridge the system has. To change the button
mapping default, install a different software cartridge and master clear the system.
The buttons on Impact telephones are designated as L buttons; the buttons on DigiTech and
Impression telephones are designated as A and B buttons. Table 3–1 lists each A and B button
and its equivalent on an Impact telephone. The programming steps in this manual use A and B
button designations; if you are programming from an Impact telephone, you must use the proper
telephone programming overlay with the A and B designations. Telephone overlays are included
with the literature package for the digital telephone system. You can also find sample overlays at
the end of Chapter 4, Records.
Table 3–1: DigiTech And Impact Programming Buttons
Impression
A1
A2
A3
A4
A5
A6
A7
A8
A9
A10
A11
A12
A13
A14
A15
A16
B1
B2
B3
B4
B5
B6
Software Type
Snnnn DigiTech 24-line telephones
Innnn Impact 24-line speakerphones
DigiTech
A1
A2
A3
A4
A5
A6
A7
A8
A9
A10
A11
A12
A13
A14
B9
B10
B1
B2
B3
B4
B5
B6
B7
B8
Telephone Type
Impact
L01
L02
L03
L04
L05
L06
L07
L08
L09
L10
L11
L12
L13
L14
L15
L16
L17
L18
L19
L20
L21
L22
L23
L24
Digital Telephone System
System Programming 3 – 9