Station To Station Port Reassignment - Comdial G0408 Manual

Digital Telephone System
3.7.27

Station To Station Port Reassignment

Description: Use this procedure to reassign the programming attributes for a station connected to a
particular station port to a different station port (logical to physical reassignment). This
feature allows you to automatically exchange all software attributes for a station (logical
assignment) connected at one station port with those attributes assigned to another station
at a different station port without physically relocating the stations (physical assignment)
or reprogramming any of the attributes.
You can use this programming action to reassign the extension number and all other
programmable attributes that you have assigned to one station port to a different port.
This feature allows you to make adds, moves, and changes without relocating the station
wiring.
NOTE:
To Program: 1. Dial 57 to re-assign station to port.
2. Dial station extension number, 0010–7999.
3. Dial physical port number 10–57.
4. Dial # to make assignment.
5. Dial
To change setting, repeat procedure and make different selection.
3 – 76 System Programming
Do not confuse this feature with the automatic station relocation feature
discussed in the system configuration portion of these programming
procedures. Also note that the system will not allow you to reassign the
station 10/station port 10 assignment.
for configuration mode.
"ASSIGN STA/PORT "
"PHYS POR T XX"
"LOGICAL STA XX "
IMI66–107