Audible Monitoring - Comdial G0408 Manual

IMI66–107
3.7.3

Audible Monitoring

The DSS/BLF at a multiline station provides a visual indication of idle, busy, and ringing status of the
monitored stations. You can also provide audible indication of direct and delayed ringing for selected
stations; however, you must first enable the station monitoring feature on a system-wide basis.
Enable Audible Monitoring
Description: Enable audible monitoring on a system-wide basis using this feature.
To Program 1. Dial 20.
2. Press A1 to switch between enable and disable (LED On = Enable)
3. Dial
To change setting, repeat procedure and make opposite selection.
Assign Audible Monitoring To Stations
Description: Once you have enabled audible monitoring system wide, you must select each station and
the type of audible monitoring that you want to program.
To Program: 1. Dial 53.
2. Dial 20.
3. Select monitoring type.
4. Select stations ports (LED On = Feature Assigned)
5. Dial
To change setting, repeat procedure and make different selection.
—OR—
dial 1 to Enable
dial 2 to Disable.
for configuration mode.
—Dial 1 for no audible monitoring
—Dial 2 for direct ring monitoring
—Dial 3 for delayed ring monitoring.
—Station 10–57: Dial 10–57 or press C10–C57.
next monitoring condition
—OR—
dial for next station feature
—OR—
dial for configuration mode.
Digital Telephone System
"MONITOR XXXXXXX"
"MONITOR ENABLED"
"MONITOR DISABLED"
"STATION FEATURES"
"AUDIBLE MONITOR "
"NONE"
"DIRECT RING"
"DELAYED RING "
System Programming 3 – 51