Enable Special Sra Area Code Tables - Comdial G0408 Manual

IMI66–107
3.17.3

Enable Special SRA Area Code Tables

Description: The four special area code tables must first match a dialed area code and then match the
dialed office code with office code entries in the matched table. With a complete match
found, the system routes the call over the line group that you have assigned to the
matched office code in the matched special area code table.
NOTE: When programming the special area code tables, note that all office code
Assigning the Special Area Codes
To Program: To assign the special area codes to the four tables,
1. Type I
2. From the main menu, type 1 and press RETURN for system COS menu.
3. From the system COS menu, type 16 for specialized route access menu
4. From specialized route access menu, type 6 to assign area code to special table
5. Type 1–4 to choose special table 1–4 and press RETURN.
6. Type specific area code for table and press RETURN.
7. Repeat steps 4 through 5 for each remaining special table and press RETURN.
8. To clear the special area code tables if needed
9. Return to the system COS menu.
entries are defaulted to line group 1; therefore, to minimize programming
effort, assign those codes with the fewest entries to line groups 2 through 4.
For example: if you are programming for code entries 200 through 299, and
codes 000 through 209 requires one line group while codes 210 through 299
requires another line group, leave line group 1 assigned to the larger quantity
of entries that require the most programming effort (210-299)and reprogram
the line group for the smaller quantity of entries.
7 4 6 and press RETURN.
and press RETURN.
and press RETURN.
—type 7 and press RETURN
—type 1–4 for table 1–4
—press RETURN, and repeat as necessary.
Digital Telephone System
System Programming 3 – 135