Saved Number Redial - Comdial G0408 Manual

Digital Telephone System
Ringing Line Preference
The system can be programmed on a per station basis to provide ringing line preference
on all lines programmed for ringing at the station. When ringing line preference is
enabled at a station, taking the handset off-hook automatically connects the station to any
outside line that is ringing at it. A line button will not have to be pressed. With ringing
line preference enabled, the telephones denote a ringing line with an orange colored
status light. If a station also has prime line assigned, the prime line will always be
answered first even though it may be the second line to ring. The ability of a particular
station to answer a ringing line without line selection is enabled by the station class of
service programming.
See also, Line Features.
S

Saved Number Redial

This feature enables a button action to save the first 16 digits of the last number manually
dialed from the keypad. The saved number can be redialed at a later time. The saved
number is permanently available for later use until it is replaced with a new number.
When the caller identification feature is active, this saved number redial feature will save
the identified number for redial.
See also, Redial.
Scout 900
MX
Software release 16A supports the Scout 900
telephone is a 900 megahertz, spread-spectrum, wireless telephone. While the Scout
operates much like an Impact telephone, you should note that a few operational
differences do exist. The "Call Announce Receive" and "All Call Receive" features
require that you install and enable a headset. The Scout does not support the "Autoredial"
or "voice response to SOHVA." It is a good idea to program any Scout telephone station
port with "Delayed Ringing" to an ExecuMail port or attendant station in case the user is
out of range when he or she receives a call.
The Scout does have a range test that the installer or user can perform. Comdial highly
recommends that the installer perform a preliminary on-site range test to make sure the
Scout meets the customer's needs (for more information on how to use the range-test
feature, see GCA70–308).
There is no limit to the number of Scout telephones that you can install on a system.
However, because of channel restrictions, only nine Scouts can be in use at one time
A – 58 Digital Telephone System Features
Digital Wireless Telephone
Digital Wireless Telephone. The Scout
MX
IMI66–107