Automatic Transfer Of Voice Mail; Voice Mail Line Id - Comdial G0408 Manual

Digital Telephone System
3.14.2

Automatic Transfer of Voice Mail

Description: Use this programming feature to arrange for an immediate connection of a transferred
line from voice mail to a digital station port.
To Program: 1. Dial 25.
2. Press A1 to toggle between enable and disable (LED On = Enable)
3. Dial
To change setting, repeat procedure and make different selection.
NOTE: Do not turn on this feature if you turn on the screen and/or confirm options
3.14.3

Voice Mail Line ID

Description: You can assign voice mail identification (ID) numbers to the voice mail lines. A voice
mail ID number can contain a maximum of six digits. A voice mail ID number allows the
voice mail equipment to identify which line it is answering and play the appropriate
greeting. The ID numbers that you assign here must match the ID numbers that you
assign when you program the voice mail equipment.
To Program: 1. Dial 43.
2. Select line port (LED On = Line assigned)
3. Dial
4. Dial ID number (6 digit maximum).
5. Dial
3 – 110 System Programming
—OR—
dial 1 to enable (A1 LED is on)
dial 2 to disable.
for configuration mode.
provided by the voice mail system. These two options provide an immediate
transfer that will prevent the voice mail system from providing any screen or
confirm action.
—Line port 1–14 = Dial 01–14 or press A1–A14
—Line port 15, 16 = Dial 15, 16 or press B1, B2
—Line port 17–24 = Dial 17–24 or press HOLD then press A1–A8.
#
to clear current ID.
for further ID assignment
—OR—
dial for configuration mode.
"V MAIL AUTO XFER"
"VOICE MAIL LN ID"
IMI66–107