Line Button; Line Group Button - Comdial G0408 Manual

IMI66–107
3.8.8

Line Button

Description: Line select buttons provide access to outside lines.
To Program: 1. Dial 56.
2. Dial 02.
3. Select button to be programmed:
4. Select line ports to be assigned.
5. Repeat steps 3 and 4 until all lines are assigned.
6. Dial
7. Select station port (LED On = Selected)
8. Dial
To clear assignment , dial 5604, press button, dial # select station, and dial
3.8.9

Line Group Button

Description: This button provides one-button access to a line group.
To Program: 1. Dial 56.
2. Dial 13.
3. Select button to be programmed
4. Dial 1–4 for line group 1–4.
5. Select station ports (LED On = Selected)
6. Dial
To clear assignment, dial 5604, press button, dial # select station, and dial
—Press A1–A14, B1–B10.
—Line port 1–14 = Dial 01–14 or Press A1–A14
—Line port 15, 16 = Dial 15–16 or Press B1, B2
—Line port 17–24 = Dial 17–24 or press HOLD then press A1–A8.
#
to finish button mapping.
—Station 10–57: Dial 10–57 or press C10–C57.
for further LINE/BUTTON assignment
—OR—
dial for next button mapping feature
—OR—
dial for configuration mode.
—Press A1–A14, B1–B10.
—Station 10–57 = Dial 10–57 or press C10–C57.
for next LINE GROUP button assignment
—OR—
dial for next button mapping feature
—OR—
dial for configuration mode.
Digital Telephone System
"BUTTON MAPPING"
"ASSIGN LINE"
"BUTTON MAPPING "
"ASSIGN LINE GRP"
"ASSIGN LINE GRP X"
System Programming 3 – 85
.
.