Distinctive Ringing - Co Line - Comdial DX-80 Installation & Maintenance Manual

•
Press "Y" (yes) to continue with the save operation.
• Press ° (escape) again to return to the Database Programming menu.
•
Continue making other programming changes or exit PC-DBA programming.
Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a "SEND" function
has been performed. Please refer to the Programming section of this manual to learn more about this
procedure.
Distinctive Ringing – CO Line
Distinctive Ringing – CO Line provides a means for denoting one CO Line from another while ringing. The distinction
provided is a tone allocation used to denote one CO Line from another. Eight (8) choices are available for CO Line
ringing.
Related Features
CO Line – Answering Position
Distinctive Ringing – Extension
Related Programming
System Application - Operator Code
Default Settings
CO Line – Ring Type = 0. (Range is 0~9.)
Conditions
a) CO Line – Distinctive Ringing overrides an extensions setting of Distinctive Ringing.
b) A CO Line set as Ring Type "0" has no specific ring type and follows Distinctive Ringing – Extension
settings.
Default Settings
CO Line – Category 2 – CO Ring Type is set to "0" for all CO Lines. (Range is: 0-8.)
Programming Abstract
Program the CO Line(s) for the CO Ring Type. Type "0" indicates this CO Line has no distinctive ringing
assignment and will follow the ringing Type of the Extension(s) that ring for this CO Line.
Programming via the DET (Digital Extension Terminal)
back next
Note: [ ], [ ], [
three buttons below the LCD display to actuate the associated operation.
•
Enter Database Administration using the feature code
++++++++
"
show
•
Press [ ]. The DB Item Select screen displays.
•
Input 02-740~755-11, then press [
CO Line selected (CO Line 1=740 ~ CO Line 16=755).
chg
•
Press [ ] until the appropriate value for this data item displays.
•
Press to return to the previous menu level or press
screen or exit programming.
Programming via PC-DBA
Note: PC-DBA is a DOS-based programming utility.
•
Enter PC-DBA by typing "DX-80" at the DOS prompt in the PC-DBA working directory and then pressing «.
P7290 IMM
DX-80 I
NSTALLATION AND
show chg bksp
], [ ], [ ], and [
." (Note: This eight-character password can be changed.)
save
]. This advances to the CO RING TYPE programming screen for the
3-105
M M 03/01
AINTENANCE ANUAL
Transfer
save
] are LCD interactive button operations. Use the
!+*
and then enter the DB Admin password
to return to the DB Item Selection