Smdr Printout - Comdial G0408 Manual

Digital Telephone System
3.18.4

SMDR Printout

Description: With this programming step, SMDR provides continuous printout of system-wide station
call activity as it is collected by the system.
To Program: 1. Dial 77.
2. Dial 2.
3. Press A1 to toggle between enable and disable (A1 LED On = Enabled)
4. Dial
To change setting, repeat procedure and make opposite selection.
Description: Programming action adds the cost of each reported call to the SMDR printout.
To Program: 1. Dial 77.
2. Dial 1.
3. Press A1 to toggle between enable and disable (A1 LED On = Enabled)
4. Dial
To change setting, repeat procedure and make opposite selection.
3 – 145 System Programming
SMDR Printout As System Collected
—OR—
dial 1 to enable printing
dial 2 to disable printing.
for configuration mode.
SMDR Cost Reporting
—OR—
dial 1 to enable
dial 2 to disable.
for configuration mode.
"SMDR PRINT XXX"
"SMDR PRINT ON"
"SMDR PRINT OFF"
"SMDR PRINT "
"XXXXXXX COSTING "
"WITH COSTING "
"WITHOUT COSTING "
IMI66–107