Comdial G0408 Manual page 240

Digital Telephone System
To Program:
NOTE:
NOTE :
10. Dial .
11. Dial 4 then dial 001–999 for Tier 2 rate in cents.
12. Dial .
13. Dial 5 then dial 001–999 for surcharge rate in cents.
14. Dial
15. Dial
To change setting, repeat procedure and make different selection.
3 – 128 System Programming
1. Dial 76.
2. Dial table number (01–33).
3. Dial 1 to enter matching digits.
Call Cost Table 1 will not accept matching digits.
4. Dial # to clear previous digits.
5. Dial matching digits for costed number
(16 max. # = match anything digit).
6. Dial to end matching digits.
Dialing a 00 or a 000 as an entry in steps 7, 9, 11, and 13 will clear the
current entry for those steps.
7. Dial 2 then dial 01–99 for Tier 1 time in tenths of minutes.
8. Dial .
9. Dial 3 then dial 001–999 for Tier 1 rate in cents.
to program next call cost table and repeat steps 2-14 until all tables are
entered.
for configuration mode.
IMI66–107
"CALL COST TBL "
"CALL COST TBL XX"
"XXXXXXXX "
"XXXXXXXX "
"TIER 1 TIME XX "
"TIER 1 RATE XXX "
"TIER 2 RATE XXX "
"SURCHARGE XXX "