Specialized Route Access; Enable The Sra Feature - Comdial G0408 Manual

Digital Telephone System
3.17 Specialized Route Access (SRA)
The SRA feature allows the system to select a line group based on the digits the user has dialed. By doing
this, it matches calls with their ideal routes. The feature provides a table-driven routing scheme where the
numbers the users dial cause the system to chose a line group after comparing the dialed number with
entries in an office code table, and area code table or, four special area code tables.
You should make a record in Chapter 4 of all programming decisions that you make—it will help you
keep track of what you have done and will help you troubleshoot any problem that might arise later.
You can only program the SRA feature from the VDT and not from station 10.
Use your VDT to program for the specialized route access (SRA) feature.
Line group dialing codes 81, 82, and 83 do not provide access to the SRA feature, but they could provide
a means of bypassing SRA, allowing users access to line groups outside of the specialized routing
process. To ensure that the system routes all calls through SRA, use the feature inhibit programming
procedure described in section 3.17.7 to inhibit dialing codes 81, 82, 83.
The first step in the VDT programming sequence is to enter password. Do this by typing I 746 . Once
in the programming mode, type a selection number from the main menu and follow the screen prompts to
complete your programming requirements.
3.17.1

Enable The SRA Feature

Description: When you enable the SRA feature, you must first clear all assigned prime line, idle line
preference, and direct line appearance to inhibit all direct line access for the system
stations, and you must assign lines to the line groups the system will use.
To Program: 1. Type I
2. From the main menu, type 1 and press RETURN for system COS menu.
3. From the system COS menu, type 16 for specialized route access menu
4. From specialized route access menu, type 1 for SRA feature
5. Type 1 to enable or type 0 to disable SRA feature and press RETURN.
6. To return to the main menu, press and hold CTRL and type C.
3 – 132 System Programming
7 4 6 and press RETURN.
and press RETURN.
and press RETURN.
CAUTION
IMI66–107