The Tracker Paging System - Comdial G0408 Manual

Digital Telephone System
3.20

The Tracker Paging System

The optional Tracker Paging System allows users to send alpha/numeric or numeric-only messages to
Tracker pagers assigned to station extension numbers. The type of message that the system delivers
depends upon the model Tracker Pager being used.
You should make a record of all programming decisions that you make—it will help you keep track of
what you have done and will help you troubleshoot any problem that might arise later.
NOTE: A lighted LED next to the programming button for the selection indicates the current
configuration. When a single button provides a toggle (on/off) action, the lighted LED
indicates the feature is active.
The first step in any programming sequence is to enter the base level. Once in this mode, you can dial the
feature code for any desired configuration. Enter the base level with the following procedure: press
INTERCOM then dial #746 . When you want to end the programming, press the SPEAKER button
to end the programming procedure and return the system to normal operation.
3 – 154 System Programming
IMI66–107