All-Call And Zone Paging - Comdial G0408 Manual

IMI66–107
3.7.2

All-Call and Zone Paging

You can program the system so that the users can make announcements to stations located in certain areas
of the site or to all of the stations. Similarly, you can program a station with one-button access to the
paging feature.
Assign All-Call Or Zone Paging Feature
Description: Telephone users can receive voice announcements through their telephone loudspeakers,
or through an external paging amplifier and speaker connected to a PA port. They can
transmit these voice announcements with their telephone handsets. You can arrange the
programming so that the users can make announcements to stations located in certain
areas of the site or to all of the stations. By default, All-Call Originate and Receive is
available to all stations.
To Program: 1. Dial 55.
2. Choose paging assignment
3. Select station ports (LED On = Feature Active).
4. Dial
To change setting, repeat procedure and make different selection.
—Dial 1 for zone 1 originate
—Dial 2 for zone 2 originate
—Dial 3 for zone 3 originate
—Dial 4 for all-call originate
—Dial 5 for zone 1 receive
—Dial 6 for zone 2 receive
—Dial 7 for zone 3 receive
—Dial 8 for all-call receive
—Dial 9 to clear all assignments.
—Station 10–57 = Dial 10–57 or press C10–C57.
to assign other paging
—OR—
dial for configuration mode.
Digital Telephone System
"PAGING"
"ORIGINATE ZONE 1"
"ORIGINATE ZONE 2"
"ORIGINATE ZONE 3"
"ALL-CALL ORIG."
"RECEIVE ZONE 1"
"RECEIVE ZONE 2"
"RECEIVE ZONE 3"
"ALL-CALL RECEIVE"
"CLEAR PAGING"
System Programming 3 – 49