Account Codes; Account Code Length; Account Code List - Comdial G0408 Manual

IMI66–107
Length For Entered Account Codes
Description: This feature defines the number of account code digits that a user must enter before the
system will accept the code. Account code length can range from 3 to 16 digits;
however, its length must always be equal to or greater than the current verified account
code length.
To Program: To specify the number of entered account code digits,
1. Dial 75.
2. Dial 09.
3. Dial number of digits (3—16) for account code length.
NOTE: The entered digits must be equal to or greater than the verifiable digits
4. Dial
To change setting, repeat procedure and make different selection.
3.9.2

Account Code List

Description: Use this programming feature to create the list of account codes for use.
To Program: 1. Dial 75.
2. Dial 05.
3. Dial account code digits. Maximum number of digits must be equal to number of
4. To enter another account code, dial #, then dial its number.
5. Dial
To remove account codes from list,
1. Dial 75.
2. Dial 06.
3. Dial account code to be removed.
4. To remove another account code, dial #, then dial its number.
5. Dial
specified in Section 3.9.1 but can not be greater than 16.
for configuration mode.
account code digits specified in Section 3.9.1.
for configuration mode.
for configuration mode.
Digital Telephone System
"SMDA PROGRAMMING"
"MAX ACCT CODE X "
"SMDA PROGRAMMING"
"SET ACCT. CODE "
"SMDA PROGRAMMING"
"CLEAR ACCT. CODE"
System Programming 3 – 89