IMI66–107
3.7.28
System Alarm Report Stations
You can program the system to report any system alarms to designated stations.
Enable Alarm Reporting
Description:
If you arrange the system to report alarms, also use this programming feature to enable
stations to display alarm reports after the station user takes appropriate action.
To Program: 1. Dial 28.
2. Press A1 to toggle between enable and disable (LED On = Enable)
3. Dial
To change setting, repeat procedure and make different selection.
Select Alarm Reporting Stations
Description:
After you turn on the alarm reporting feature, use this procedure to select the alarm
reporting station.
To Program: 1. Dial 53.
2. Dial 28.
3. Select station ports (LED On = Selected)
4. Dial
To clear current setting, repeat procedure.
—OR—
dial 1 to enable
dial 2 to disable.
for configuration mode.
—Station 10–57: Dial 10–57 or press C10-C57.
for next station feature
—OR—
dial
for configuration mode.
Digital Telephone System
"ALARM REPORTS "
"STATION FEATURES"
"ALARM RECEIVE "
System Programming 3 – 77