Pause Time; Recall/Flash - Comdial G0408 Manual

Digital Telephone System
3.5.3

Pause Time

Description: During auto dials and speed dials, it is sometimes necessary to delay the sending of digits
to give switching equipment time to prepare for receiving them. A pause is stored for this
purpose whenever the user presses the HOLD button. You can set the length of the pause
with this programming feature.
To Program: 1. Dial 13.
2. Select time.
3.
To change setting, repeat procedure and make different selection.
3.5.4

Recall/Flash

Description: The system can generate either a line disconnect (recall) or a host system feature access
signal (flash) depending upon the programmed time.
To Program: 1. Dial 12.
2. Select time.
3. Dial
To change setting, repeat procedure and make different selection.
3 – 34 System Programming
—Dial 1 or Press A1
—Dial 2 or Press A2
—Dial 3 or Press A3
—Dial 4 or Press A4
—Dial 5 or Press A5
—Dial 6 or Press A8
—Dial 7 or Press A9
—Dial 8 or Press A10
—Dial 9 or Press A11
—Dial 0 or Press A12.
Dial for configuration mode.
—Dial 1 or Press A1
—Dial 2 or Press A2
—Dial 3 or Press A3
—Dial 4 or Press A4
—Dial 5 or Press A5
—Dial 6 or Press A8
—Dial 7 or Press A9
—Dial 8 or Press A10
—Dial 9 or Press A11
—Dial 0 or Press A12.
for configuration mode.
"PAUSE TIME XXX"
"PAUSE TIME 0.50"
"PAUSE TIME 1"
"PAUSE TIME 1.50"
"PAUSE TIME 2"
"PAUSE TIME 3"
"PAUSE TIME 5"
"PAUSE TIME 7.50"
"PAUSE TIME 10"
"PAUSE TIME 15"
"PAUSE TIME 20"
"RECALL/FLSH XXXX"
"RECALL/FLSH 0.08"
"RECALL/FLSH 0.30"
"RECALL/FLSH 0.50"
"RECALL/FLSH 0.60"
"RECALL/FLSH 0.75"
"RECALL/FLSH 0.88"
"RECALL/FLSH 1"
"RECALL/FLSH 1.50"
"RECALL/FLSH 2"
"RECALL/FLSH 3"
IMI66–107