Smda Printout - Comdial G0408 Manual

Digital Telephone System
3.18.3

SMDA Printout

Description: Call cost reports, produced by the system for printing, are generated automatically
whenever the system detects that the records storage area is ninety-five percent full.
Program the system to automatically generate these reports for printing at a certain time
each day if desired.
To Program: 1. Dial 75.
2. Dial 13 for auto report time
3. Dial 14 for report definition.
4. Choose reports for printing.
5. Dial
To change setting, repeat procedure and make different selection.
3 – 143 System Programming
Automatic SMDA Reports
—Dial new time in hours and minutes (HH MM in 24 hour time) or dial
current time. To clear the time dial 0000.
—Dial 1 for station report
—Dial 2 account report
—Dial 3 line report
—Dial 4 department report
—Dial 5 print all
—Dial 6 delete records
—Dial 7 for DCD report.
for next SMDA feature
—OR—
dial for configuration mode.
"SMDA PROGRAMMING"
"AUTO TIME XXXX"
"AUTO REPORT "
"STATION REPORT"
"ACCOUNT REPORT"
"LINE REPORT"
"DEPT. REPORT"
"PRINT RECORDS"
"DELETE RECORDS"
"DCD REPORT"
IMI66–107
to accept