IMI66–107
3.17.4
Insert Digits For SRA
Description:
You may program the system, on a per line group basis, to insert up to 8 digits before a
dialed number. This feature is useful if the dialed number must match a specific format
for the group being used. You may insert numbers 0–9, , #, or P for pause.
To Program: 1. Type I
2. From the main menu, type 1 and press RETURN for system COS menu.
3. From the system COS menu, type 16 for specialized route access menu
4. Type 8 for assign insert digit menu and press RETURN.
5. Type 1–4 for line group number and press RETURN.
6. Type SRA insert digits. (You may use a maximum of 8 digits. Digits may include
7. Repeat steps 4–6 to assign insert digits for each line group.
8. To clear the insert digits if needed
9. To return to the main menu, press and hold CTRL and type C.
7 4 6
and press RETURN.
and press RETURN.
0–9, , #, and P for pause.)
Press RETURN.
—type 9 and press RETURN
—type 1–4 for line group number and press RETURN and repeat as necessary.
Digital Telephone System
System Programming 3 – 137